Subject: Re: esp broken in -current?
To: Martin Husemann <martin@duskware.de>
From: Brian A. Seklecki <lavalamp@spiritual-machines.org>
List: port-sparc
Date: 08/13/2002 00:41:27
On Mon, 12 Aug 2002 @ 5:39pm (+0200), Martin Husemann wrote:

MH> Maybe I missed this (just trying to catch up with mail) - is it a known
MH> fact that the esp scsi driver is broken in -current?
MH>
MH> I tried to upgrade my LX to -current but it won't boot. Old dmesg is:
MH>
MH> dma0 at sbus0 slot 4 offset 0x8400000: dma rev 2
MH> esp0 at dma0 slot 4 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
MH> scsibus0 at esp0: 8 targets, 8 luns per target
MH> ...
MH> ...
MH> scsibus0: waiting 2 seconds for devices to settle...
MH> sd0 at scsibus0 target 0 lun 0: <IBM, DCAS-32160, S65A> SCSI2 0/direct fixed
MH> sd0: 2063 MB, 8188 cyl, 3 head, 172 sec, 512 bytes/sect x 4226725 sectors
MH> sd0: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers, tagged queueing
MH> root on sd0a dumps on sd0b
MH>
MH> With -current it hangs after
MH>
MH> scsibus0: waiting 2 seconds for devices to settle...


...there've been quite a few posts recently about esp* lossage...what's the
changelod on the esp.c file look like?  I can forward you the thread's i have
or you can check them out on the archives website.  I've been using isp* on
my LX for a year so I havnt noticed anything.

http://cvsweb.netbsd.org/bsdweb.cgi/syssrc/sys/dev/sbus/esp_sbus.c
http://cvsweb.netbsd.org/bsdweb.cgi/syssrc/sys/arch/sparc/dev/esp_obio.c

-lava

MH>
MH> or after the sd0: messages.
MH>
MH> Any easy workarounds? What happened?
MH>
MH> Martin
MH>

later -           | _BonaFide[] = { coder, author, | /~\ The ASCII Ribbon
Brian A. Seklecki | problem solver, scholar, BOFH, | \ / Campaign Against
                  | vegetarian, runner, NetBSD     |  X  Exchange, Outlook
                  | advocate, spiritual machine }; | / \ & HTML Email

PGP: 0111 4618 0111 4618 4AB2 24EB C853 6611 75C4 A91E A7A7 4973

"GNU/Linux: About as stable as the elements at the bottom of the periodic table"