Hi,

> I haven't had problems burning CDs.  
> 
> What commands are you using?

I think you use obedience drive. :-)

root@Auroraa# pkg_info | grep cdrecord
cdrecord-1.8        This program allows you to create CD's on a CD-Recorder
root@Auroraa# cdrecord -VVVVVV -vvvvvvv -debug -dummy speed=2 driver=sony_cdu924 dev=/dev/cd0c cd_sparc.img
File: 'cd_sparc.img' tracksize: 503316480 secsize: 2048 tracktype: 1 = CD-ROM sectype: 1 = CD-ROM mode 1 dbtype: CD-ROM mode 1 flags 1080
dev: /dev/cd0c speed: 2 fs: -1
Cdrecord 1.8 (sparc-unknown-netbsd1.4Y) Copyright (C) 1995-2000 Jg Schilling
TOC Type: 1 = CD-ROM
fs: 4194304 buflen: 4198400
cdrecord: shared memory segment attached: 10103000
buf: 10103000 bufend: 10504000, buflen: 4198400
buf: 10103000 bufend: 10504000, buflen: 4198400 (align 0)
scsidev: '/dev/cd0c'
devname: '/dev/cd0c'
scsibus: -2 target: -2 lun: -2
cdrecord: Device not configured. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.

console message
cd0(esp0:6:0):  Check Condition on CDB: 0x25 00 00 00 00 00 00 00 00 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  ASC 0x89 ASCQ 0x00

1.8.1a01 and, 1.9a01 is same too. :-(

Of course,
root@Auroraa# dmesg | grep cd
cd0 at scsibus0 target 6 lun 0: <SONY, CD-R   CDU948S, 1.0j> SCSI2 5/cdrom removable


# I have good idea of make list of CD-R drive able to burn CD for NetBSD.
# Do you think it? > all


thanks



OGATA Hiroshi <ogata@isp.qix.org>