I just inherited a new SS5 and would obviously prefer it ran BSD.

I have it set up booting diskless with the netbsd.GENERIC.gz kernel
found in ftp.netbsd.org:/pub/arch/sparc/snapshot/20000304/binary/
kernel/.

This is a visual transliteration so this is about as far as I can read:

zs1 at obio slot0 offset0x0 level 12 softpri 6
zs_console flags: 1
kbd0 at zs1 channel 0 (console input)
zs_console flags: 0
ms0 at zs1 channel 1
slavioconfig at obio0 slot 0 offset 0x800000 not configured
auxreg0 at obio0 slot 0 offset 0x900000
power0 at obio slot 0 offset 0x910000 level 2
fdc0 at obio0 slot 0 offset 0x400000 level 11 softpri 4: chip 82077
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
iommu0 at mainbus0 addr 0x10000000: version 0x5/0x0, page-size 4096, range 64MB
sbus0 at iommu0: clock = 21.250 MHz
dma0 at sbus0 slot 5 offset 0x8400000: rev 2
esp0 at dma0 slot 5 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
bpp0 at sbus0 slot 5 offset 0xc800000 level 2 (ipl 3): rev 2
ledma0 at sbus0 slot 5 offset 0x8400020: rev 2
le0 at ledma0 slot 5 offset 0x8c00000 level 6: address 08:00:20:8e:65:05
le0: 8 receive buffers, 2 transmit buffers
le0: supplying EUI64: 08:00:20:ff:fe:8e:65:05
audiocs0 at sbus0 slot 4 offset 0xc000000 level 9: CS4231A
audio0 at audiocs0: full duplex
power-manageent at sbus0 slot 4 offset 0xa000000 not configured
SUNW,lpvi at sbus0 slot 2 offset 0x300000 level 13 not configured
bpp1 at sbus0 slot 2 0x200000 level 3: rev esc
cgsix0 at sbus0 slot 3 offset 0x0 level 9: SUNW,501-2325, 1152x900, rev 11 \
(console)data fault: pc=0xf01eb368 addr=0xc0 sfsr=1a6<PERR=0,LVL=1,AT=5,\
FT=1,FAV,OW>
panic: kernel fault
halted

Program terminated
Type  help  for more information
ok

Anyone else see this?

Anyone got any ideas?

				--*greywolf;
--
	OpenSource is NOT exclusive to Linux.  Explore your options!