For NetBSD 1.4, here's the dmesg output of a GENERIC kernel.
I thought it might interest someone.

uctrl is the interface to the microcontroller which handles things like
	power management and the lcd display (a status display independent
	of TFT display).
modem is the builtin 14.4 modem (which emulates a 16450).
p9100 is the display chip (a weitek p9100)
ts102 is the pcmcia controller

NetBSD 1.4 (GENERIC) #0: Sun May  9 03:00:22 MEST 1999
     pk@flambard:/usr/src/sys/arch/sparc/compile/GENERIC
real mem = 33210368
avail mem = 28266496
using 405 buffers containing 1658880 bytes of memory
bootpath: /iommu@0,10000000/sbus@0,10001000/espdma@4,8400000/esp@4,8800000/sd@3,0
mainbus0 (root): Tadpole_S3GX
cpu0 at mainbus0: MB86904 @ 110 MHz, on-chip FPU
cpu0: 16K instruction (32 b/l), 8K data (16 b/l): cache enabled
obio0 at mainbus0
clock0 at obio0 slot 0 offset 0x202000: mk48t08 (eeprom)
timer0 at obio0 slot 0 offset 0xd00000 delay constant 52
zs0 at obio0 slot 0 offset 0x100000 level 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at obio0 slot 0 offset 0x0 level 12 softpri 6
kbd0 at zs1 channel 0 (console)
ms0 at zs1 channel 1
slavioconfig at obio0 slot 0 offset 0x800000 not configured
auxreg0 at obio0 slot 0 offset 0x900000
auxio2 at obio0 slot 0 offset 0x910000 not configured
uctrl at obio0 slot 0 offset 0xd1000020 level 11 not configured
clk-ctrl at obio0 slot 0 offset 0x3c0000 not configured
modem at obio0 slot 0 offset 0x3a0000 level 13 not configured
iommu0 at mainbus0 addr 0x10000000: version 0x4/0x0, page-size 4096, range 64MB
sbus0 at iommu0: clock = 22 MHz
p9100 at sbus0 slot 0 offset 0x8000000 level 2 not configured
dma0 at sbus0 slot 4 offset 0x8400000: rev 2
esp0 at dma0 slot 4 offset 0x8800000 level 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
probe(esp0:3:0): max sync rate 5.00Mb/s
sd0 at scsibus0 targ 3 lun 0: <ADTX, AXSITS2532U 011D, A50G> SCSI2 0/direct fixed
sd0: 2067MB, 4200 cyl, 16 head, 63 sec, 512 bytes/sect x 4233600 sectors
SUNW,bpp at sbus0 slot 4 offset 0xc800000 level 3 not configured
ledma0 at sbus0 slot 4 offset 0x8400010: rev 2
le0 at ledma0 slot 4 offset 0x8c00000 level 6: address 00:00:83:ae:21:90
le0: 8 receive buffers, 2 transmit buffers
ts102 at sbus0 slot 1 offset 0x2000000 level 11 not configured
SUNW,DBRIs3 at sbus0 slot 2 offset 0x40 level 9 not configured
root on sd0a dumps on sd0b
root file system type: ffs

-- 
Matt Thomas               Internet:   matt@3am-software.com
3am Software Foundry      WWW URL:    http://www.3am-software.com/bio/matt/
Sunnyvale, CA             Disclaimer: I avow all knowledge of this message