Hi,
I upgraded my sparc from 1.3D to -current as of friday, I've got something
strange: the kernel doesn't find the root device by itself, it as me
for it. If I enter 'sd0', normal boot goes on (dmesg appened below). 
As I use this machine without console most of the time (I use it as
a big hard disk I can plug on an ethernet) it's a bit annoying :)

Then I tried to build and install new boot blocks, but installboot complained
that the new boot blocks are too big ... I guess it's because of the last
changes to it ?
So I reverted to the 1.3.2 boot blocks.

Any idea of what could be wrong ?

--
Manuel Bouyer, LIP6, Universite Paris VI.           Manuel.Bouyer@lip6.fr
--

NetBSD 1.3H (CORDOUAN) #0: Sat Sep 12 18:10:08 MEST 1998
    bouyer@cordouan.lip6.fr:/home/bouyer/1.3H/sys/arch/sparc/compile/CORDOUAN
real mem = 20918272
avail mem = 18370560
using 128 buffers containing 524288 bytes of memory
bootpath: /sbus0/esp0/sd@0,0
mainbus0 (root): Sun 4/40
cpu0 at mainbus0: MB86900/1A or L64801 @ 25 MHz, WTL3170/2 FPU
cpu0: 64K byte write-through, 16 bytes/line, sw flush: cache enabled
memreg0 at mainbus0 ioaddr 0xf4000000
clock0 at mainbus0 ioaddr 0xf2000000: mk48t02 (eeprom)
timer0 at mainbus0 ioaddr 0xf3000000 ipl 10 delay constant 10
auxreg0 at mainbus0 ioaddr 0xf7400000
zs0 at mainbus0 ioaddr 0xf1000000 ipl 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at mainbus0 ioaddr 0xf0000000 ipl 12 softpri 6
kbd0 at zs1 channel 0 (console)
ms0 at zs1 channel 1
fdc0 at mainbus0 ioaddr 0xf7200000 ipl 11 softpri 4: chip 82072
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
audioamd0 at mainbus0 ioaddr 0xf7201000 ipl 13 softpri 4
audio0 at audioamd0
sbus0 at mainbus0 ioaddr 0xf8000000: clock = 25 MHz
dma0 at sbus0 slot 0 offset 0x400000: rev 1
esp0 at sbus0 slot 0 offset 0x800000 level 3: ESP100, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 3 lun 0: <QUANTUM, FIREBALL1280S, 630C> SCSI2 0/direct fixed
sd0: 1222MB, 4135 cyl, 4 head, 151 sec, 512 bytes/sect x 2503872 sectors
le0 at sbus0 slot 0 offset 0xc00000 level 5: address 08:00:20:0a:9e:aa
le0: 8 receive buffers, 2 transmit buffers
bwtwo0 at sbus0 slot 3 offset 0x0 level 7: SUNW,501-1561, 1152 x 900 (console)
bwtwo0: attached to /dev/fb
root device: sd0
dump device (default sd0b): 
file system (default generic): 
root on sd0a dumps on sd0b
root file system type: ffs