> 	Assuming you are sure sd0c is the right partition... what does
> 	a disklabel sd0 return?

# disklabel sd0
sd0: no disk label
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: fictitious
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 16
sectors/cylinder: 1008
cylinders: 2358
total sectors: 2376864
rpm: 3600
interleave: 1
trackskew: 0
cylinder skew: 0
headswitch: 0		#milliseconds
track-to-track seek: 0	#milliseconds
drivedata: 0

1 partitions:
#	size	offset	fstype	[fsize bsize	cpg]
 a:536870911	      0       unused    0      0        # (Cyl. 0-532610 
*)
disklabel: boot block size 0
disklabel: super block size 0
disklabel: partition a: partition extends past end of unit
disklabel: warning, unused partition c: size 2376864 offset 0



I can boot this disk to Solaris, if that makes any difference.

Joe

> On Sat, 11 Jul 1998, Joseph Red wrote:
> 
> > Well, the subj. says most of it.  I'm mostly newbie, but not
completely. 
> > I'm trying to mount a Solaris partition in netBSD1.3.  He's a shot:
> > 
> > # mount /dev/rsd0c /
> > mount_ffs: /dev/rsd0c on /: Block device required
> > # mount /dev/sd0c /
> > mount_ffs: /dev/sd0c on /: specified device does not match mounted
device
> > 
> > Any ideas on this would be appreciated.
> > 
> > Thanks
> > Joe
> >