In my Sparc ELC saga...

(i'm booting via serial console because I have no keyboard as of yet)

bwtwo0 at sbus0 slot 3 offset 0x0: SUNW,501-1561, 1152 x 900
bwtwo0: attached to /dev/fb

This is correct, but when it hits this my screen goes into what looks
like a mode that is 'out of sync' with what it should be running at.
Shakey horizontal lines (light grey).

fdc0 at mainbus0 ioaddr 0xf7200000fdcresult: overrun
 CFGLOCK: unexpected response pri 11, softpri 4: chip 82077

I have no floppy drive. I will recompile a new kernel when I can...
is the above going to be a problem?


next, error 13 (from errno.h) is permission denied. 
/etc/exports:
/mnt/ashpool/root ashpool

I've tried things like '/mnt/ashpool/root -alldirs -maproot=root ashpool'
but mountd claims it is an invalid exports entry. Eh?

Or is it another problem?

nfs_boot: trying RARP (and RPC/bootparam)
nfs_boot: client_addr=0x80c18c1c
nfs_boot: server_addr=0x80c18c63
nfs_boot: hostname=ashpool
root on 3jane:/mnt/ashpool/root
root file system type: nfs
exec /sbin/init: error 13
init: not found
panic: no init
syncing disks... done

Frame pointer is at 0xf1355d88
Call traceback:
  pc = 0xf012dcd8  args = (0x0, 0x90000fe5, 0xf016e800, 0xf1355ea8, 0xf1355e38,
0x0, 0xf1355df0) fp = 0xf1355df0
  pc = 0xf0038454  args = (0x100, 0x0, 0x1, 0xf1355f08, 0xa00, 0xf05e29c0,
0xf1355e58) fp = 0xf1355e58
  pc = 0xf0025f90  args = (0x100, 0xf015e000, 0x1, 0xf0009f5c, 0x0, 0x3,
0xf1355ec0) fp = 0xf1355ec0
  pc = 0xf0009f10  args = (0xf05e0800, 0x8, 0x1, 0xf05e2dc0, 0x303758,
0x2ff860, 0xf1355f50) fp = 0xf1355f50
  pc = 0x0  args = (0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0) fp = 0x0
rebooting