Hi folks,
  I've got a SparcStation 1 here that I'm trying to get 1.3 installed on
with no luck.  I first tried the netboot thing and get as far as the
server replying with the root file system where the boot loader says
it doesn't know what le(0,0,0) is and dies.  So, I gave up on that and
installed a copy of 4.1.1 on the disk so I could partition and get 
enough of a net up to copy the miniroot to the swap partition.  That's
fine and dandy but when I boot the miniroot, the kernel seems to hang
after telling me where the root file system is.  Can anyone tell me
what I'm doing wrong and/or how to get to the point of actually installing
NetBSD?  Thanks in advance

Nate

p.s.  NetBSD seems to be reading really wrong physical information from
the drive...

------- kernel messages - cut here ---------------
timer0 at mainbus0 ioaddr 0xf3000000 delay constant 7
auxreg0 at mainbus0 ioaddr 0xf7400000
zs0 at mainbus0 ioaddr 0xf1000000 pri 12, softpri 6
zstty0 at zs0 channel 0 (console)
zstty1 at zs0 channel 1
zs1 at mainbus0 ioaddr 0xf0000000 pri 12, softpri 6
kbd0 at zs1 channel 0
ms0 at zs1 channel 1
fdc0 at mainbus0 ioaddr 0xf7200000 pri 11, softpri 4: chip 82072
audioamd0 at mainbus0 ioaddr 0xf7201000 pri 13, softpri 4
audio0 at audioamd0
sbus0 at mainbus0 ioaddr 0xf8000000: clock = 25 MHz
dma0 at sbus0 slot 0 offset 0x400000: rev 1
esp0 at sbus0 slot 0 offset 0x800000 pri 3: ESP100, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd3 at scsibus0 targ 0 lun 0: <QUANTUM, FIREBALL SE3.2S, PJ09> SCSI2 0/direct fi
xed
sd3: 3079MB, 7637 cyl, 3 head, 19 sec, 512 bytes/sect x 6306048 sectors
le0 at sbus0 slot 0 offset 0xc00000 pri 5: address 08:00:20:02:18:68
le0: 8 receive buffers, 2 transmit buffers
root on sd3b dumps on sd3b
WARNING: clock gained 15 days -- CHECK AND RESET THE DATE!
root file system type: ffs

-- 
Nathan Bohlmann                                        njb@elfwerks.com   
Elfwerks Consulting                        http://www.elfwerks.com/~njb