Hi!

After installing NetBSD-13_BETA on a SPARCstation IPX without any
problem I still have some questions:

1. If a SUN keyboard model 5c is connected the IPX is using the
   'cgsix' and this keyboard as console. If the original SUN keyboard
   model 5 is connected no keyboard is detected and the IPX switches
   to tty[ab] for console. There is are DIP switches on the model 5
   keyboard, but I have no info about their purpose. --> How to make
   the IPX detecting the model 5 keyboard? (because the model 5c
   keyboard belongs to another SUN...)

2. I want to put in a new, _bigger_ harddisk. Any SUN specific
   constraints or problems to consider?

Thanks, Markus.

PS: Anyway, here the boot messages:

NetBSD 1.3_BETA (GENERIC_SCSI3) #11: Wed Dec  3 00:47:13 MET 1997
    pk@flambard:/usr/src1/sys/arch/sparc/compile/GENERIC_SCSI3
real mem = 67002368
avail mem = 63721472
using 128 buffers containing 524288 bytes of memory
bootpath: /sbus@1,f8000000/esp@0,800000/sd@3,0
mainbus0 (root): SUNW,Sun 4/50
cpu0 at mainbus0: cache chip bug; trap page uncached: W8601/8701 or MB86903 @ 40 MHz, on-chip FPU
cpu0: 64K byte write-through, 32 bytes/line, hw flush: cache enabled
memreg0 at mainbus0 ioaddr 0xf4000000
clock0 at mainbus0 ioaddr 0xf2000000: mk48t02 (eeprom)
timer0 at mainbus0 ioaddr 0xf3000000 delay constant 17
auxreg0 at mainbus0 ioaddr 0xf7400003
zs0 at mainbus0 ioaddr 0xf1000000 pri 12, softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at mainbus0 ioaddr 0xf0000000 pri 12, softpri 6
kbd0 at zs1 channel 0 (console)
ms0 at zs1 channel 1
audioamd0 at mainbus0 ioaddr 0xf7201000 pri 13, softpri 4
audio0 at audioamd0
sbus0 at mainbus0 ioaddr 0xf8000000: clock = 20 MHz
dma0 at sbus0 slot 0 offset 0x400000: rev 1+
esp0 at sbus0 slot 0 offset 0x800000 pri 3: ESP100A, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
probe(esp0:0:0): max sync rate 4.80Mb/s
sd3 at scsibus0 targ 0 lun 0: <IMPRIMIS, 94601-15, 1250> SCSI1 0/direct fixed
sd3: 989MB, 1931 cyl, 15 head, 69 sec, 512 bytes/sect x 2026965 sectors
probe(esp0:3:0): max sync rate 5.00Mb/s
sd0 at scsibus0 targ 3 lun 0: <CONNER, CP30200  SUN0207, 4234> SCSI2 0/direct fixed
sd0: 203MB, 2123 cyl, 4 head, 49 sec, 512 bytes/sect x 416108 sectors
le0 at sbus0 slot 0 offset 0xc00000 pri 5: address 08:00:20:0d:3b:bc
le0: 8 receive buffers, 2 transmit buffers
PMS,SHI at sbus0 slot 2 offset 0x40000 not configured
cgsix0 at sbus0 slot 3 offset 0x0: SUNW,501-1672, 1152 x 900, rev 7 (console)
cgsix0: attached to /dev/fb
fdc0 at mainbus0 ioaddr 0xf7200000 pri 11, softpri 4: chip 82072
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
root on sd0a dumps on sd0b
root file system type: ffs