Hello,
i hope this isnt a FAQ and you dont get this message twice:

I installed NetBSD1.2 on an Seagate2.7-GigDrive under my sun4c
with NetBSD and an 1GigIBM-Drive.
When i connected the Seagate to my SS10(AxilClone) i got the
following:
----
ttya initialized
Cpu #0 TI,TMS390Z50^@
Cpu #1 Nothing there
Cpu #2 Nothing there
Cpu #3 Nothing there
Probing Memory Bank #0 16 Megabytes of DRAM
Probing Memory Bank #1 16 Megabytes of DRAM
Probing Memory Bank #2 Nothing there
Probing Memory Bank #3 Nothing there
Probing Memory Bank #4 Nothing there
Probing Memory Bank #5 Nothing there
Probing Memory Bank #6 Nothing there
Probing Memory Bank #7 Nothing there
Probing /iommu@f,e0000000/sbus@f,e0001000 at f,0  espdma^@ esp^@ sd^@ st^@ ledma^@ le^@ SUNW,bpp^@ SUNW,DBRIe^@ mmcodec^@
Probing /iommu@f,e0000000/sbus@f,e0001000 at 0,0  cgsix^@
Probing /iommu@f,e0000000/sbus@f,e0001000 at 1,0  Nothing there
Probing /iommu@f,e0000000/sbus@f,e0001000 at 2,0  cgthree^@
Probing /iommu@f,e0000000/sbus@f,e0001000 at 3,0  Nothing there

, Keyboard Present
ROM Rev. 2.12, 32 MB memory installed, Serial #3805724.
Ethernet address 0:40:dc:0:12:1c, Host ID: 723a121c.

Testing  16 megs of memory at addr   4000000
[...]
sbus/ledma@f,400010/le@f,c00000   File and args:
Lost Carrier  (transceiver cable problem?)
Cable problem or twisted pair hub link-test disabled.
Use the PROM command "help ethernet" for more information.

Type  help  for more information
ok boot disk
Boot device: /iommu/sbus/espdma@f,400000/esp@f,800000/sd@3,0   File and args:
>> NetBSD BOOT [$Revision: 1.4 $]
Booting netbsd @ 0x4000
1130464+108952+70088+[45312+49546]=0x15add2
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.

NetBSD 1.2 (GENERIC) #4: Fri Sep 27 22:03:25 MET DST 1996
    pk@kwik:/usr/src1/sys/arch/sparc/compile/GENERIC
real mem = 32772096
avail mem = 28860416
using 400 buffers containing 1638400 bytes of memory
bootpath: /iommu@f,e0000000/sbus@f,e0001000/espdma@f,400000/esp@f,800000/sd@3,0
mainbus0 (root): SUNW,Axil-311
cpu0 at mainbus0: TI,TMS390Z50 @ 36 MHz, on-chip FPU
cpu0: physical 20K instruction (64 b/l), 16K data (32 b/l) cache enabled
---------
Now happens nothing :(

At the Sparc2 it boots:
----
ok boot disk1
Boot device: /sbus/esp@0,800000/sd@1,0   File and args:
>> NetBSD BOOT [$Revision: 1.4 $]
Booting netbsd @ 0x4000
1130464+108952+70088+[45312+49546]=0x15add2
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.

NetBSD 1.2 (GENERIC) #4: Fri Sep 27 22:03:25 MET DST 1996
    pk@kwik:/usr/src1/sys/arch/sparc/compile/GENERIC
real mem = 16642048
avail mem = 14082048
using 203 buffers containing 831488 bytes of memory
bootpath: /sbus0/esp@0,800000/sd@3,0:d
mainbus0 (root)
cpu0 at mainbus0: SUNW,Sun 4/75 (RT601 or L64811 v2 @ 40 MHz, L64814 FPU)
cpu0: cache chip bug; trap page uncached
cpu0: 65536 byte write-through, 32 bytes/line, hw flush cache enabled
memreg0 at mainbus0 ioaddr 0xf4000000
clock0 at mainbus0 ioaddr 0xf2000000: mk48t02 (eeprom)
timer0 at mainbus0 ioaddr 0xf3000000 delay constant 17
...

What am i doing wrong ?

Thank you in advance

Bye
   Peter