Port-sgimips archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Re: cpu error 4 (was: Re: O2 framebuffer problems with install kernel)



Hi,

On Jul 29, 2008, at 8:57 PM, Michael Lorenz wrote:

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

On Jul 29, 2008, at 12:15, Jorge Acereda Maciá wrote:

On Jul 29, 2008, at 5:42 PM, Michael Lorenz wrote:

On Jul 29, 2008, at 11:23, Jorge Acereda Maciá wrote:

With the first patch (the one using BUS_DMA_COHERENT), I get constant reboots, usually under heavy IO load (probably an unrelated problem).

Lots of network traffic on the onboard interface?

Yes, I'll try to isolate if it's due to network IO or disk IO.

My bet is on mec - even if it works right it's not very fast and doesn't do stuff like checksums in hw. If you've got a PCI ethernet board sitting around - I can personally vouch for 3com 3c905 based cards to work just fine, others used DEC 2114x clones.

I'm right now building a kernel on the O2 and installing some pre- fetched stuff from pkgsrc at the same time. It has been running for quite a while and no hangs so far, so you're probably right.
After that I'll try to do some heavy network IO.


In theory anything supported by NetBSD should work but since the O2 is a little more ticklish than - say, macppc and sparc - regarding DMA and cache synchronization ( macppc for instance is always DMA coherent ) I'd expect occasional trouble.

Any change with the 2nd patch?

Well, I wanted to keep that machine self-hosting and so far I've been unable to checkout the kernel sources :-)

Eh, you won't be impressed by build times.

Indeed. My 68030@50 Amiga compiled faster (well, probably the reason is that gcc2 is much faster than gcc4)



Home | Main Index | Thread Index | Old Index