Hello all,

I've just installed NetBSD on this SGI O2 I was given, and I must say that
this first expirience with NetBSD was very pleasant as the install was
straight-forward.

However, I've got some questions but I hope they're not too basic :) (In
order of interest)

1) hinv reports 1gb, netbsd kernel only 256mb. Found this:
http://mail-index.netbsd.org/port-sgimips/2004/03/24/0000.html anyone
knows about changes on that point until now?

2) shall I be punished for ignoring 'crime: cpu error 4 at address
45be130' in syslog? Actually I'd really like to know what this crime
device is :)

3) while mec0 is connected to a switch it works in full-duplex and all is
fine. however, when connected to a hub it chooses half-duplex
allright, but the net performance is crappy and I get in syslog:
  Sep 11 10:39:03  /netbsd: mec0: device timeout
  Sep 11 10:39:36  last message repeated 2 times
  Sep 11 10:44:45  last message repeated 2 times
any easy solutions for that?

4) shall I be punished for ignoring 'arplookup: unable to enter address
for xxx.xxx.xxx.xxx@00:12:17:51:e0:f1 on mec0 (host is not on local
network)'. The address mentioned, appears to be the public address of the
machine that nats for the NetBSD box...

5) everybody ignores 'pci_addr_fixup' right?

Thanks,
Wouter

-------------8<-------------hinv------------->8-------------
                   System: IP32
                Processor: 300 Mhz R12000, with FPU
     Primary I-cache size: 32 Kbytes
     Primary D-cache size: 32 Kbytes
     Secondary cache size: 1024 Kbytes
              Memory size: 1024 Mbytes
                 Graphics: CRM, Rev C
                    Audio: A3 version 1
                SCSI Disk: scsi(0)disk(2)
               SCSI CDROM: scsi(0)cdrom(4)

-------------8<-------------boot------------->8-------------
obtaining  from server
8663552+348940 entry: 0x80069000
[ Kernel symbol table missing! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0.2 (INSTALL32_IP3x) #0: Wed Mar 23 00:25:33 UTC 2005
        jmc@faith.netbsd.org:/home/builds/ab/netbsd-2-0-2-RELEASE/sgimips/200503220140Z-obj/home/builds/ab/netbsd-2-0-2-RELEASE/src/sys/arch/sgimips/compile/INSTALL32_IP3x
total memory = 256 MB
(6848 KB reserved for ARCS)
avail memory = 234 MB
mainbus0 (root):  SGI-IP32 [SGI, 8], 1 processor
cpu0 at mainbus0: MIPS R12000 CPU (0xe23) Rev. 2.3 with unknown FPC type
(0x900) Rev. 0.0
cpu0: 32KB/64B 2-way set-associative L1 Instruction cache, 64 TLB entries
cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
cpu0: 1024KB/64B 2-way set-associative write-back L2 Data cache
crime0 at mainbus0 addr 0x14000000: rev 1.4 (CRIME_ID: 1000000000a1) mace0
at mainbus0 addr 0x1f000000
com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a, working
fifo
com0: console
mace: established interrupt 4 (level 3f00000)
com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a,
working fifo
mace: established interrupt 4 (level fc000000)
pckbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0
mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110 Ethernet, rev 1
mec0: Ethernet address 08:00:69:0e:bd:18
nsphy0 at mec0 phy 8: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
mace: established interrupt 3 (level 0)
macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
pci_addr_fixup: 000:01:0 0x9004 0x8078 new address 0x00001000 (size 0x100)
pci_addr_fixup: 000:01:0 0x9004 0x8078 new address 0x80100000 (size
0x1000)
pci_addr_fixup: 000:02:0 0x9004 0x8078 new address 0x00002000 (size 0x100)
pci_addr_fixup: 000:02:0 0x9004 0x8078 new address 0x80200000 (size
0x1000)
pci_addr_fixup: 000:03:0 0x104c 0x0500 new address 0x00003000 (size 0x10)
pci_addr_fixup: 000:03:0 0x104c 0x0500 new address 0x80300000 (size 0x10)
mace: established interrupt 7 (level 0)
pci0 at macepci0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok ahc0 at
pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter
ahc0: interrupting at crime interrupt 8
ahc0: Using left over BIOS settings
ahc0: aic7880: Wide Channel A, SCSI Id=0, 16/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter
ahc1: interrupting at crime interrupt 9
ahc1: Using left over BIOS settings
ahc1: aic7880: Wide Channel A, SCSI Id=0, 16/253 SCBs
scsibus1 at ahc1: 16 targets, 8 luns per target
tl0 at pci0 dev 3 function 0
tl0: Texas Instruments ThunderLAN
tl0: Ethernet address 00:00:58:01:53:42
tl0: interrupting at crime interrupt 10
icsphy0 at tl0 phy 1: ICS1890 10/100 media interface, rev. 3
icsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0 at tl0 phy 31: ThunderLAN 10BASE-T media interface, rev. 5
tlphy0: 10baseT, 10baseT-FDX, auto
biomask 07 netmask 07 ttymask 07 clockmask 87
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 2 lun 0: <SGI, IBM DNES-309170Y, SA30> disk fixed
sd0: 8682 MB, 11474 cyl, 5 head, 309 sec, 512 bytes/sect x 17781520
sectors
sd0: async, 8-bit transfers, tagged queueing
cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-6201TA, 1037> cdrom
removable
cd0: async, 8-bit transfers
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
arplookup: unable to enter address for xxx.xxx.xxx.xxx@00:12:17:51:e0:f1
on mec0 (host is not on local network)
crime: cpu error 4 at address 45be130
crime: cpu error 4 at address 400c080
crime: cpu error 4 at address 4290e58
crime: cpu error 4 at address 4290e58
crime: cpu error 4 at address 4292f04
arplookup: unable to enter address for xxx.xxx.xxx.xxx@00:12:17:51:e0:f1
on mec0 (host is not on local network)