Hi,

I tried to install current in O2, but the following error was 
displayed and could not be installed by me.

Can anybody help me?

--------
 Status: Command failed
    Command: /usr/mdec/sgivol -f -w boot /usr/mdec/ip3xboot sd0
     Hit enter to continue
--------------------------------------------------------------------------------
DIOCGDINFO: No such file or directory

--------

Its environment is as follows.
--------
> hinv
                   System: IP32
                Processor: 180 Mhz R5000, with FPU
     Primary I-cache size: 32 Kbytes
     Primary D-cache size: 32 Kbytes
              Memory size: 256 Mbytes
                 Graphics: CRM, Rev C
                    Audio: A3 version 1
                SCSI Disk: scsi(0)disk(1)
               SCSI CDROM: scsi(0)cdrom(4)
> boot -f pci(0)scsi(0)cdrom(4)rdisk(0)partition(8)ip3xboot
46672+368 entry: 0x80002000

NetBSD/sgimips 2.99.11 Bootstrap, Revision 1.2
(mochi@daiki.thn.ne.jp, Sun Dec 19 01:01:23 JST 2004)

devopen: pci(0)scsi(0)cdrom(4)rdisk(0)partition(0) type scsi file ip3x
8711232+317288=0x89c65c
[ Kernel symbol table missing! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.99.11 (INSTALL32_IP3x) #4: Sun Dec 19 02:16:01 JST 2004
        mochi@daiki.thn.ne.jp:/local/src/NetBSD/sparc64/src/sys/arch/sgimips/compile/obj/INSTALL32_IP3x
total memory = 256 MB
(6848 KB reserved for ARCS)
avail memory = 234 MB
mainbus0 (root): SGI-IP32 [SGI, 5], 1 processor
cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with built-in FPU Rev. 1.0
cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: a1)
mace0 at mainbus0 addr 0x1f000000
lpt0 at mace0 offset 0x380000 intr 4 intrmask 0xf0000
mace: established interrupt 4 (level f0000)
com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a, working fifo
com0: console
mace: established interrupt 4 (level 3f00000)
com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a, working fifo
mace: established interrupt 4 (level fc000000)
pckbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0
mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110 Ethernet, rev 1
mec0: Ethernet address XX:XX:XX:XX:XX:XX
nsphy0 at mec0 phy 8: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
mace: established interrupt 3 (level 0)
macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
pci_addr_fixup: 000:01:0 0x9004 0x8078 new address 0x00001000 (size 0x100)
pci_addr_fixup: 000:01:0 0x9004 0x8078 new address 0x80100000 (size 0x1000)
pci_addr_fixup: 000:02:0 0x9004 0x8078 new address 0x00002000 (size 0x100)
pci_addr_fixup: 000:02:0 0x9004 0x8078 new address 0x80200000 (size 0x1000)
mace: established interrupt 7 (level 0)
pci0 at macepci0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter
mace: established interrupt 8 (level 0)
ahc0: interrupting at crime interrupt 8
ahc0: Using left over BIOS settings
ahc0: aic7880: Wide Channel A, SCSI Id=0, 16/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter
mace: established interrupt 9 (level 0)
ahc1: interrupting at crime interrupt 9
ahc1: Using left over BIOS settings
ahc1: aic7880: Wide Channel A, SCSI Id=0, 16/253 SCBs
scsibus1 at ahc1: 16 targets, 8 luns per target
biomask 07 netmask 07 ttymask 07 clockmask 87
md0: internal 4096 KB image area
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <SGI, IBM  DCHS04Y, 3030> disk fixed
sd0: 4340 MB, 6077 cyl, 9 head, 162 sec, 512 bytes/sect x 8888543 sectors
sd0: async, 8-bit transfers, tagged queueing
cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0167> cdrom removable
cd0: async, 8-bit transfers
boot device: sd0
root on md0a dumps on md0b
root file system type: ffs
Terminal type? [vt100]



-- 
MOCHIDUKI Tomomitsu mailto:mochi@thn.ne.jp