I'm experiencing problems with the current INSTALL kernels from both local
and the releng builds.

After installing sets, the mounted install target disk becomes unuseable,
with further accesses returning "adapter resource shortage" messages beginnig
with the creation of /dev on /targetroot.

I've ruled out hardware, having tried on two R5k and an R10 O2.  The problem
occurs for at least the last week's -current source, up to and including
today's.

Below are more details.

Cheers,
-scott

<Two successive screens indicating where failure begins> ========
     Status: Running
    Command: /bin/mkdir -p /targetroot/dev

--------------------------------------------------------------------------------


<NEXT SCREEN> ===================================================

     Status: Command failed
    Command: /bin/mkdir -p /targetroot/dev
     Hit enter to continuesd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage--------------------------------------
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage


mkdir: /targetroot/dev: Device busy

<Stopping sysinst and performing a few commands> =================

[1] + Suspended               sysinst
# ls /
.profile   dev        kern       mnt2       sysinst    tmp        var
bin        etc        mnt        sbin       targetroot usr
# ls /mnt2
TRANS.TBL ip2x      ip3x      sgimips
# ls /targetroot
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
etc    home   kern   netbsd proc   usr    var
# ls /targetroot/etc
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
fstab
# sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage
sd0(ahc0:0:2:0): adapter resource shortage


startup messages follow:

System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor

Option? 5
Command Monitor.  Type "exit" to return to the menu.
> boot -f bootp():netbsd-INSTALL32_IP3x
Obtaining netbsd-INSTALL32_IP3x from server mrynet.com
8575008+352060 entry: 0x80069000
[ Kernel symbol table missing! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0_BETA (INSTALL32_IP3x) #0: Sat Apr  3 05:14:48 UTC 2004
        autobuild@tgm.netbsd.org:/autobuild/netbsd-2-0/sgimips/OBJ/autobuild/netbsd-2-0/src/sys/arch/sgimips/compile/INSTALL32_IP3x
128 MB memory, 109 MB free, 6848 KB for ARCS
mainbus0 (root): SGI-IP32 [SGI, 8], 1 processor
cpu0 at mainbus0: MIPS R10000 CPU (0x926) Rev. 2.6 with built-in FPU Rev. 0.0
cpu0: 32KB/64B 2-way set-associative L1 Instruction cache, 64 TLB entries
cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
cpu0: 1024KB/64B 2-way set-associative write-back L2 Data cache
crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: a1)
mace0 at mainbus0 addr 0x1f000000
com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a, working fifo
com0: console
mace: established interrupt 4 (level 3f00000)
com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a, working fifo
mace: established interrupt 4 (level fc000000)
pckbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0
mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
pci_addr_fixup: 000:01:0 0x9004 0x8078 new address 0x00001000 (size 0x100)
pci_addr_fixup: 000:01:0 0x9004 0x8078 new address 0x80100000 (size 0x1000)
pci_addr_fixup: 000:02:0 0x9004 0x8078 new address 0x00002000 (size 0x100)
pci_addr_fixup: 000:02:0 0x9004 0x8078 new address 0x80200000 (size 0x1000)
pci_addr_fixup: 000:03:0 0x8086 0x1229 new address 0x80300000 (size 0x1000)
pci_addr_fixup: 000:03:0 0x8086 0x1229 new address 0x00003000 (size 0x20)
pci_addr_fixup: 000:03:0 0x8086 0x1229 new address 0x80400000 (size 0x100000)
mace: established interrupt 7 (level 0)
pci0 at macepci0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter
ahc0: interrupting at crime interrupt 8
ahc0: Using left over BIOS settings
ahc0: aic7880: Wide Channel A, SCSI Id=0, 16/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter
ahc1: interrupting at crime interrupt 9
ahc1: Using left over BIOS settings
ahc1: aic7880: Wide Channel A, SCSI Id=0, 16/253 SCBs
scsibus1 at ahc1: 16 targets, 8 luns per target
fxp0 at pci0 dev 3 function 0: Intel i82557 Ethernet, rev 1
fxp0: interrupting at crime interrupt 10
fxp0: Ethernet address 00:a0:c9:4a:e9:58
nsphy0 at fxp0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
biomask 07 netmask 07 ttymask 07 clockmask 87
md0: internal 4096 KB image area
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 2 lun 0: <SEAGATE, ST39173WC, 6244> disk fixed
sd0: 8683 MB, 7501 cyl, 10 head, 237 sec, 512 bytes/sect x 17783240 sectors
sd0: async, 8-bit transfers, tagged queueing
cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-5701TA, 0167> cdrom removable
cd0: async, 8-bit transfers
boot device: sd0
root on md0a dumps on md0b
root file system type: ffs
Terminal type? [vt100]