Hi,

I just had a failed attempt at upgrading my Indigo2 using an 1.6ZI
kernel.  The console log can be found below.  Yes, I'm running the
almost-first boot-from-disk boot code on this system, so there's ample
debug informatin there.

The system appears to wedge shortly after trying to reinitialize (?)
the console tty.  I thought the kernel wasn't supposed to mess with
the settings for that tty, but apparently "something" did.  BTW, the
[BREAK] output is from the console program, and those were me trying
unsuccessfully to get in touch with DDB.

Anyone have an idea about what might be going on here?  I've tried
looking at the source and CVS logs for a few of the involved files,
but I didn't find anything which leapt out at me as obviously related
to this problem.  The previous kernel which ran successfully on this
system was built sometime on Jan 10, so not very long ago.

Regards,

- H=E5vard

------------------------------

                           Starting up the system...


NetBSD/sgimips 1.5Y  Bootstrap, Revision 1.0
(he@viola.urc.uninett.no, Mon Jul 12 12:31:09 CEST 1993)

Mem block: type 0 base 0x0 size 0x1000
Mem block: type 1 base 0x1000 size 0x1000
Mem block: type 3 base 0x8002000 size 0x73e000
Mem block: type 6 base 0x8740000 size 0xc0000
Mem block: type 3 base 0x8800000 size 0x800000
Mem block: type 5 base 0x9000000 size 0xc000
Mem block: type 3 base 0x900c000 size 0xeff4000
Local storage 887fe558
argv[0]: scsi(0)disk(2)rdisk(0)partition(8)/boot
argv[1]: OSLoadOptions=3Dauto
argv[2]: ConsoleIn=3Dserial(0)
argv[3]: ConsoleOut=3Dserial(0)
argv[4]: SystemPartition=3Dscsi(0)disk(2)rdisk(0)partition(8)
argv[5]: OSLoader=3Dboot
argv[6]: OSLoadPartition=3Dscsi(0)disk(2)rdisk(0)partition(0)
argv[7]: OSLoadFilename=3D/netbsd
Boot: scsi(0)disk(2)rdisk(0)partition(0)/netbsd
devopen: scsi(0)disk(2)rdisk(0)partition(0) type scsi file /netbsd
diskopen: 0,2,0 scsi(0)disk(2)rdisk(0)partition(0)
1594160+191596 [67520+56373]=3D0x1d2670
Starting at 0x88002000

nsym 0x1 ssym 0x881b5f9c esym 0x881d4670
argv[0]: scsi(0)disk(2)rdisk(0)partition(8)/boot
argv[1]: OSLoadOptions=3Dauto
argv[2]: ConsoleIn=3Dserial(0)
argv[3]: ConsoleOut=3Dserial(0)
argv[4]: SystemPartition=3Dscsi(0)disk(2)rdisk(0)partition(8)
argv[5]: OSLoader=3Dboot
argv[6]: OSLoadPartition=3Dscsi(0)disk(2)rdisk(0)partition(0)
argv[7]: OSLoadFilename=3D/netbsd
[ Kernel symbol table missing! ]
Mem block 1: type 0, base 0x0, size 0x1
Mem block 2: type 1, base 0x1, size 0x1
Mem block 3: type 3, base 0x8002, size 0x73e
Mem block 4: type 6, base 0x8740, size 0xc0
Mem block 5: type 3, base 0x8800, size 0x800
Mem block 6: type 5, base 0x9000, size 0xc
Mem block 7: type 3, base 0x900c, size 0xeff4
Loading cluster 2 (after kernel): 0x81b6 / 0x8740
Loading cluster 4: 0x8800 / 0x9000
Loading cluster 5: 0x9000 / 0x900c
Loading cluster 6: 0x900c / 0x18000
zs channel 0 had address 0xbfbd9830
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reseved.

NetBSD 1.6ZI (VIOLA) #15: Wed Jan 28 13:23:03 CET 2004
        he@viola.urc.uninett.no:/usr/obj/sys/arch/sgimips/compile/VIOLA=

256 MB memory, 247 MB free, 768 KB for ARCS
mainbus0 (root): SGI-IP22 [SGI, 690a6af3], 1 processor
cpu0 at mainbus0: MIPS R4400 CPU (0x460) Rev. 6.0 with MIPS R4010 FPC R=
ev. 0.0
cpu0: 16KB/16B direct-mapped L1 Instruction cache, 4 TLB entries
cpu0: 16KB/16B direct-mapped write-back L1 Data cache
cpu0: 2048KB/128B direct-mapped write-back L2 Unified cache
imc0 at mainbus0 addr 0x1fa00000: revision 3
gio0 at imc0
unknown GIO card (product 0x10 revision 0x01) at gio0 slot 2 addr 0x1f0=
00000 not configured
hpc0 at gio0 addr 0x1fb80000: SGI HPC3
zsc0 at hpc0 offset 0x59830
zstty0 at zsc0 channel 1 (console i=FF=F8[BREAK]
[BREAK]