--X1bOJ3K7DJ5YkBrT
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

Hi,

I've just tried booting my R4400SC Indy with the GIO bus probe patch,
fitted with a 24-bit Newport, a Fore GIA-200 ATM card in the slot
nearest the edge of the case, and an SGI 10Mb/s AUI Ethernet card in the
slot nearer the middle of the machine, (sorry, can't remember which is
slot 1 and 2 :-). Here's the dmesg:

>> boot -f bootp():/netbsd.ip22
Setting $netaddr to 192.168.23.15 (from server 192.168.23.21)
Obtaining /netbsd.ip22 from server 192.168.23.21
[ Kernel symbol table missing! ]
IOC rev 1, machine Indy (Guiness), board rev 3
Timer calibration, got 750000 cycles (750000, 750000, 750000)
CPU clock speed =3D 150.00MHz
zs channel 0 had address 0xbfbd9830
Don't know how to configure SC on this platform.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6ZF (GENERIC32_IP2x) #1: Sun Dec 14 18:21:52 GMT 2003
        matt@lister:/home/matt/netbsd/usr/src/sys/arch/sgimips/compile/obj/=
GENERIC32_IP2x
65536 KB memory, 56556 KB free, 768 KB for ARCS, 3376 KB in 844 buffers
mainbus0 (root): SGI-IP22 [SGI, 69085f26], 1 processor
cpu0 at mainbus0: MIPS R4400 CPU (0x450) Rev. 5.0 with MIPS R4010 FPC
Rev. 0.0
cpu0: 16KB/16B direct-mapped L1 Instruction cache, 48 TLB entries
cpu0: 16KB/16B direct-mapped write-back L1 Data cache
cpu0: 1024KB/128B direct-mapped write-back L2 Unified cache
imc0 at mainbus0 addr 0x1fa00000
imc0: Revision 3
gio0 at imc0
unknown product 0x5c revision 0x00 at gio0 slot 1 addr 0x1f600000 not confi=
gured
unknown product 0x04 revision 0x00 at gio0 slot 2 addr 0x1f000000 not confi=
gured
hpc0 at gio0 addr 0x1fb80000: SGI HPC3
zsc0 at hpc0 offset 0x59830
zstty0 at zsc0 channel 1 (console i/o)
zstty1 at zsc0 channel 0
pckbc at hpc0 offset 0x59840 not configured
sq0 at hpc0 offset 0x54000: SGI Seeq 80c03
sq0: Ethernet address 08:00:69:08:5f:26
wdsc0 at hpc0 offset 0x44000: WD33C93B SCSI, rev=3D0, target 7
scsibus0 at wdsc0: 8 targets, 8 luns per target
dsclock0 at hpc0 offset 0x60000
haltwo0 at hpc0 offset 0x58000: HAL2 revision 4.1.0
audio0 at haltwo0: half duplex
hpc1 at gio0 addr 0x1fb00000: SGI HPC3
zsc at hpc1 offset 0x59830 not configured
pckbc at hpc1 offset 0x59840 not configured
sq at hpc1 offset 0x54000 not configured
wdsc at hpc1 offset 0x44000 not configured
dsclock at hpc1 offset 0x60000 not configured
haltwo at hpc1 offset 0x58000 not configured
biomask 07 netmask 07 ttymask 0f clockmask bf
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <SEAGATE, ST31055N, 0532> disk fixed
sd0: 1010 MB, 4177 cyl, 4 head, 123 sec, 512 bytes/sect x 2069860 sectors
sd0: sync (200.00ns offset 12), 8-bit (5.000MB/s) transfers, tagged queueing
boot device: sd0

HTH

Matt
--=20
"The theory of Space and Time is a cultural artefact made possible by
the invention of graph paper."

--X1bOJ3K7DJ5YkBrT
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (NetBSD)

iD8DBQE/3MKpKP58eR+X2TMRAp/3AKCRzqkf3GkYVFsfCtZlKKE1jfpv/wCfUf62
i5IoebDlOthvv5hScjuNdQ0=
=+H3K
-----END PGP SIGNATURE-----

--X1bOJ3K7DJ5YkBrT--