Hi,
I updated my indy to a r5000 (from r4000) but I can't boot it any more:
>> boot -f bootp()netbsd-INDY_INSTALL.ecoff
Obtaining netbsd-INDY_INSTALL.ecoff from server juliard.antioche.eu.org
6044544+0+244924 entry: 0x88069000
 [ no symbols available ]
IOC rev 1, machine Indy (Guiness), board rev 3
Timer calibration, got 750000 cycles (750000, 750000, 750000)
CPU clock speed = 150.00Mhz
zs channel 0 had address 0xbfbd9830
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6L (RAMDISK_INDY) #0: Sat Jan 18 13:13:13 UTC 2003
    autobuild@tgm.daemon.org:/autobuild/HEAD/sgimips/OBJ/autobuild/HEAD/src/sys/arch/sgimips/compile/RAMDISK_INDY
65536 KB memory, 53488 KB free, 768 KB for ARCS, 3376 KB in 844 buffers
mainbus0 (root): SGI-IP22 [SGI, 6906de17], 1 processor
cpu0 at mainbus0: MIPS R5000 CPU (0x2310) Rev. 1.0 with built-in FPU Rev. 1.0
cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
cpu0: 512KB/32B direct-mapped write-back L2 Data cache
cpu0: disabling IP22 SysAD L2 cache
imc0 at mainbus0 addr 0x1fa00000
imc0: Revision 3
gio0 at imc0
hpc0 at gio0 addr 0x1fb80000: SGI HPC3
zsc0 at hpc0 offset 0x59830
zstty0 at zsc0 channel 1 (console i/o)
zstty1 at zsc0 channel 0
sq0 at hpc0 offset 0x54000: SGI Seeq 80c03
sq0: Ethernet address 08:00:69:06:de:17
wdsc0 at hpc0 offset 0x44000: WD33C93B SCSI, rev=0, target 7
scsibus2 at wdsc0: 8 targets, 8 luns per target
dsclock0 at hpc0 offset 0x60000
biomask 07 netmask 07 ttymask 0f clockmask bf
md0: internal 3072 KB image area
scsibus2: waiting 2 seconds for devices to settle...
sd0 at scsibus2 target 3 lun 0: <QUANTUM, FIREBALL ST3.2S, 0F0C> disk fixed
sd0: 3090 MB, 7068 cyl, 4 head, 223 sec, 512 bytes/sect x 6328861 sectors
sd0: sync (200.0ns offset 12), 8-bit (5.000MB/s) transfers, tagged queueing
boot device: sd0
root on md0a dumps on md0b
WARNING: clock gained 10 days -- CHECK AND RESET THE DATE!
root file system type: ffs
panic: TLB out of universe: ksp 0xc59abb98 epc 0x8829b15c vaddr 0xffffe000
Stopped in pid 1 (init) at      0x88291b14:     jr      ra
                bdslot: nop

Any idea ? Or am I out of luck with an r5000 for now ?

--
Manuel Bouyer, LIP6, Universite Paris VI.           Manuel.Bouyer@lip6.fr
     NetBSD: 24 ans d'experience feront toujours la difference
--