Hi!

On Tue, 31 Dec 2002 12:01:55 +0900
Christopher SEKIYA <wileyc@rezrov.net> wrote:

> On Mon, Dec 30, 2002 at 05:46:18PM +0100, Hendrik Scholz wrote:
> 
> > scsibus0: waiting 2 seconds for devices to settle...
> > Timedout SCB handled by another timeout
> > Timedout SCB handled by another timeout
> > probe(ahc0:0:1:0): SCB 1d - timed out in Message-out phase, SEQADDR
> > == 0xbc SCSIRATE == 0x0
> 
> Looks like a bus termination problem.  What does the SCSI chain look
> like?  Does SCSI work under IRIX?

I only have 6.5.0 foundation CDs and thus was not able to install Irix
on the O2 (due to the RM5200 cpu from what I know). When booting the
6.5.17 overlays miniroot I could access the harddisk and read/write from
it.
My SCSI chain consists of one (or two) SCSI disks which are detected
from "hinv -t". I removed the CD-ROM as it seems to be broken (I cannot
boot from it). The SCSI terminator is still attached.

I had the same problems with the older "latest O2 diff" and then built a
kernel to disable the Adaptec controller and add support for a Symbios
based scsi controller which I plugged into the PCI slot.
I got the same errors from that controller.

Hendrik

-- 
Hendrik Scholz - <hscholz@raisdorf.net> - http://raisdorf.net/

drag me, drop me - treat me like an object