Hi!

On Sun, 29 Dec 2002 11:04:03 +0900
Christopher SEKIYA <wileyc@rezrov.net> wrote:

> I've put diffs against today's -current and a test kernel for the IP32
> at http://www.rezrov.net/software/netbsd/ip32-diff-20021229 and
> http://www.rezrov.net/software/netbsd/netbsd-ip32-20021228,
> respectively.
> 

Here is what happens on my RM5200 O2:

> boot -f bootp():netbsd-ip32-20021228
Setting $netaddr to 10.17.1.101 (from server 10.13.1.2)
Obtaining netbsd-ip32-20021228 from server 10.13.1.2
1832976+156740 entry: 0x80069000
 [ no symbols available ]
CPU clock speed = 300.70Mhz*
before mips_machdep_cache_config: SE = 0
after mips_machdep_cache_config: SE = 1000
R5000/Rm5200 SCACHE
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6K (ERWIN) #0: Sun Dec 29 11:07:53 JST 2002
    wileyc@izu:/usr/local/tmp/erwin/sys/arch/sgimips/compile/ERWIN
128 MB memory, 109 MB free, 6848 KB for ARCS, 6656 KB in 1664 buffers
mainbus0 (root): SGI-IP32 [SGI, 1], 1 processor
cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU
Rev. 10.0 cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48
TLB entries cpu0: 32KB/32B 2-way set-associative write-back L1 Data
cache cpu0: 1024KB/32B direct-mapped write-back L2 Unified cache
crime0 at mainbus0 addr 0x14000000: rev 10.1 (a1)
mace0 at mainbus0 addr 0x1f000000: rev 1
com0 at mace0 offset 0x390000 intr 4: ns16550a, working fifo
com0: console
mace: established interrupt at ipl 4 (level 4)
mace: CRM_MASK now 10
com1 at mace0 offset 0x398000 intr 4: ns16550a, working fifo
pckbc0 at mace0 offset 0x320000 intr 5: stub
lpt0 at mace0 offset 0x380000 intr 4: stub
mcclock0 at mace0 offset 0x3a0000
mec0 at mace0 offset 0x280000 intr 3: MAC-110 Ethernet, rev 1
mec0: station address 08:00:69:0c:17:51
nsphy0 at mec0 phy 26: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
macepci0 at mace0 offset 0x80000 intr 7: rev 1
pci_addr_fixup: 000:03:0 0x1011 0x0014 new address 0x00003000 (size
0x80) pci_addr_fixup: 000:03:0 0x1011 0x0014 new address 0x80100000
(size 0x80) mace: established interrupt at ipl 7 (level 0)
mace: CRM_MASK now 11
pci0 at macepci0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ahc0 at pci0 dev 1 function 0
ahc0: interrupting at crime irq 0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: Host Adapter Bios disabled.  Using default SCSI device parameters
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 2 function 0
ahc1: interrupting at crime irq 1
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: Host Adapter Bios disabled.  Using default SCSI device parameters
scsibus1 at ahc1: 16 targets, 8 luns per target
Digital Equipment DECchip 21041 ("Tulip Plus") Ethernet (ethernet
network, revis ion 0x11) at pci0 dev 3 function 0 not configured
biomask 07 netmask 07 ttymask 07 clockmask 87
MACE_ISA_MASK was 0
CRM_MASK: 300710, MACEISA_MASK (1f310018) 4100000
IPsec: Initialized Security Association Processing.
scsibus0: waiting 2 seconds for devices to settle...
Timedout SCB handled by another timeout
Timedout SCB handled by another timeout
probe(ahc0:0:1:0): SCB 1d - timed out in Message-out phase, SEQADDR ==
0xbc SCSIRATE == 0x0
probe(ahc0:0:1:0): BDR message in message buffer
probe(ahc0:0:1:0): SCB 1d - timed out in Message-out phase, SEQADDR ==
0x155 SCSIRATE == 0x0
probe(ahc0:0:1:0): no longer in timeout, status = 0
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
probe(ahc0:0:1:0): SCB 1d - timed out in Message-out phase, SEQADDR ==
0xbc SCSIRATE == 0x0
probe(ahc0:0:1:0): BDR message in message buffer
probe(ahc0:0:1:0): SCB 1d - timed out in Message-out phase, SEQADDR ==
0x155 SCSIRATE == 0x0
probe(ahc0:0:1:0): no longer in timeout, status = 0
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
probe(ahc0:0:2:0): SCB 1d - timed out in Message-out phase, SEQADDR ==
0x155 SCSIRATE == 0x0
probe(ahc0:0:2:0): BDR message in message buffer
probe(ahc0:0:2:0): SCB 1d - timed out in Message-out phase, SEQADDR ==
0x155 SCSIRATE == 0x0
probe(ahc0:0:2:0): no longer in timeout, status = 0
ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
..

The result is the same when 1 or 2 disks are attached. My CDROM is
broken so it's detached permanently.

I hope this helps, Hendrik

-- 
Hendrik Scholz - <hscholz@raisdorf.net> - http://raisdorf.net/

drag me, drop me - treat me like an object