Hi!

I compiled a GENERIC kernel and got the following output:

macepci0 at mace0 offset 0x80000 intr 7: rev 1
pci_addr_fixup: 000:03:0 0x1011 0x0014 new address 0x00003000 (size
0x80) pci_addr_fixup: 000:03:0 0x1011 0x0014 new address 0x80100000
(size 0x80) mace: established interrupt at ipl 7 (level 0)
mace: CRM_MASK now 11
pci0 at macepci0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ahc0 at pci0 dev 1 function 0
ahc0: interrupting at mace
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: Host Adapter Bios disabled.  Using default SCSI device parameters
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 2 function 0
ahc1: interrupting at mace
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc1: Host Adapter Bios disabled.  Using default SCSI device parameters
scsibus1 at ahc1: 16 targets, 8 luns per target
Digital Equipment DECchip 21041 ("Tulip Plus") Ethernet (ethernet
network, revision 0x11) at pci0 dev 3 function 0 not configured biomask
07 netmask 07 ttymask 07 clockmask 87 MACE_ISA_MASK was 0
CRM_MASK: 300710, MACEISA_MASK (1f310018) 4100000
scsibus0: waiting 2 seconds for devices to settle...
Timedout SCB handled by another timeout

The last message loops regardless of the connected SCSI devices.
Is there anything I can do to help fixing the problem?

Thanks, Hendrik

-- 
Hendrik Scholz - <hscholz@raisdorf.net> - http://raisdorf.net/

drag me, drop me - treat me like an object