Bonjour Monsieur,
Merci beaucoup pour votre reponse.
Vous etes bien aimable.

I tried IP32 kernel.
The result is as follows;
It seems better than before but it stops.

            Sincerely yours,

            Yutaka Narumai  

========================================================================
> boot -f boot():/netbsd.ip32
Setting $netaddr to 223.1.1.2 (from server 223.1.1.1)
Obtaining /netbsd.ip32 from server 223.1.1.1
1245528+36896+152192 entry: 0x80002000
memory 0x163000 0x1060000
memory 0x140100 0x8000000
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc, All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California, All rights reserved.

NetBSD 1.5A (INDY) #142: Tue Jun 27 17:40:37 CEST 2000
    soren@meow:/usr/home/soren/netbsd/src/sys/arch/sgimips/compile/INDY
128 MB memory,81856 KB free, 3716 KB for ARCS, 39240 KB in 9810 buffers
mainbus0 (root): SGI-IP32 [SGI, I]
cpu0 at mainbus0: MIPS R5000 CPU (0x2321) Rev. 2.1 with built-in FPU Rev. 1.0
cpu0: L1 cache: 32KB/32B instruction, 32KB/32B data, two way set associative
cpu0: L2 cache: 512KB/32B mixed, snooping
crime0 at mainbus0 addr 0x14000000: rev 1.1
mace0 at mainbus0 addr 0x1f000000
com0 at mace0 offset 0x390000 intr 4: ns16550a, working fifo
com1 at mace0 offset 0x398000 intr 4: ns16550a, working fifo
pckbc0 at mace0 offset 0x320000 intr 5: stub
 lpt0 at mace0 offset 0x380000 intr 4
mec0 at mace0 offset 0x280000 intr 3: MAC-110 Ethernet, rev 1
mec0: station address 08:00:69:0a:ba:21
mec0: sorry, this is not a real driver
nsphy0 at mec0 phy 9: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
macepc0 at mace0 offset 0x80000 intr 7: rev 1
panic: pcierr: 80180006 4004
Stopped in swapper at 0x800f74b4:       jr    ra
                    bdslot: 0x800f74b8:  nop
======================================================================
 





> Try with an IP32 kernel.
> ----- Original Message -----
> From: "Yutaka Narumai" <ynarumai@marubun.co.jp>
> To: <port-sgimips@NetBSD.ORG>
> Cc: "Isao Nagamori" <r17413@email.sps.mot.com>
> Sent: Tuesday, February 26, 2002 9:40 AM
> Subject: SGI O2 net boot problem
> 
> 
> > Dear friends,
> >
> > I try to make a net-boot o2 system using the sgimips-20011002
> > file.
> > But the following error message comes out on the screen;
> > I use pentium base note book(NetBSD-i386 installed) and
> > 10Base-T cross cable.
> > Any advise will be highly appreciated.
> >
> >                sincerely,
> >
> >
> ============================================================================
> ==============
> > >boot -f bootp():/netbsd.ip22
> > Setting $netaddr to 223.1.1.2 (from server 223.1.1.1)
> > Obtaining /netbsd.ip22 from server 223.1.1.1
> > 1262208
> > Cannot load bootp():/netbsd.ip22
> > Range check failure: text start 0x88002000, size 0x134280
> > Text section would overwritten an already loaded program. Unableto execute
> boot():/netbsd.ip22: not enough space
> > Unable to load bootp():/netbsd.ip22: not enough space
> > >
> >
> ============================================================================
> ===============
> >
> >
> >                   Yutaka Narumai
> >
> >
> >
> >
>