Subject: Re: RAMfs netboot kernel and bootable CD image available for TESTING
To: Scott G. Akmentins-Taylor <firstname.lastname@example.org>
From: Hendrik Scholz <email@example.com>
Date: 11/14/2001 19:43:40
On Wed, 14 Nov 2001 08:04:46 -0600
firstname.lastname@example.org (Scott G. Akmentins-Taylor) wrote:
SCSI problems (see other mail)
> > I tested this one three times.
> > Booting works fine (beside the scsi problem reported here earlier).
> > I had to choose sd0 for installation and was unable to use sd1 as /home for
> > example. I don't know if it is possible to use several scsi disks for
> > installation on other ports but it sounds obvious to me.
> Ah, so you're getting it booted after installation then. Good. Power-cycling
> are you?
When power-cycling the box it works again.
Normally I wait a minute or so (the last line apears 20 times on the screen)
and then the box reboots with the nice Indy tune and the system is ok and
boots without any problems.
So far it seems to be the same problem.
Hendrik Scholz <email@example.com>
Where do you want to be tomorrow ?