8.0 on Synology DS209j

[Frank Wille <frank%phoenix.owl.de@localhost>]

Hi,

I just installed 8.0 as an upgrade on 8.0_BETA.

The DS209j is running 24h/7d as my media server for Kodi with a 2 TB RAID-1.
Everything still working fine.


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
        mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/sandpoint/compile/GENERIC
Model: synology DS209j
total memory = 65536 KB
avail memory = 58624 KB
OpenPIC Version 1.2: Supports 1 CPUs and 26 interrupt sources.
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
mainbus0 (root)
cpu0 at mainbus0: 8245 (Revision 0.4), ID 0 (primary)
cpu0: HID0 0x90c000<DOZE,DPM,ICE,DCE>, powersave: 1
cpu0: 265.31 MHz
eumb0 at mainbus0
com0 at eumb0 unit 0: ns16550a, working fifo
com0: console
com0: interrupting at irq 40
ociic0 at eumb0
iic0 at ociic0: I2C bus
rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
lmtemp0 at iic0 addr 0x48: lmtemp LM75 Temperature Sensor
satmgr0 at eumb0 unit 1: button manager (synology)
satmgr0: interrupting at irq 41
cfi at mainbus0 not configured
pci0 at mainbus0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 1057 product 0006 (rev. 0x14)
satalink0 at pci0 dev 13 function 0: Silicon Image SATALink 3512 (rev. 0x01)
satalink0: SATALink BA5 register space disabled
satalink0: bus-master DMA support present
satalink0: primary channel wired to native-PCI mode
satalink0: using irq 16 for native-PCI interrupt
atabus0 at satalink0 channel 0
satalink0: secondary channel wired to native-PCI mode
atabus1 at satalink0 channel 1
ohci0 at pci0 dev 14 function 0: vendor 1033 product 0035 (rev. 0x44)
ohci0: interrupting at irq 17
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 14 function 1: vendor 1033 product 00e0 (rev. 0x05)
ehci0: interrupting at irq 17
ehci0: EHCI version 1.0
ehci0: 1 companion controller, 3 ports: ohci0
usb1 at ehci0: USB revision 2.0
skc0 at pci0 dev 15 function 0: irq 18
skc0: interrupt moderation is 0 us
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0 at skc0 port A: Ethernet address 00:11:32:xx:xx:xx
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
vmmask 1c000000 schedmask 1c000000 highmask 7c000000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 33164691 Hz quality 100
satalink0: port 0: device present, speed: 1.5Gb/s
satalink0: port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <ST2000VN004-2E4164>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
uhub0 at usb0: vendor 1033 (0x1033) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 1033 (0x1033) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <ST2000VN004-2E4164>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(satalink0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 3907026944 (1907728 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
kern.module.path=/stand/sandpoint/8.0/modules
skc0: interrupt moderation is 1000 us
frank@rhea envstat
            Current  CritMax  WarnMax  WarnMin  CritMin  Unit
[lmtemp0]
  lmtemp:    40.500   80.000                             degC
frank@rhea df
Filesystem   512-blocks       Used      Avail %Cap Mounted on
/dev/raid0a  3837202152 2113899464 1531442584  57% /
/dev/raid0d     8132316     127028    7598676   1% /var
kernfs                2          2          0 100% /kern
ptyfs                 2          2          0 100% /dev/pts
procfs                8          8          0 100% /proc
tmpfs             32768          8      32760   0% /var/shm

-- 
Frank Wille