KURO-BOX/T4 booted and sysinst went fine.

[Makoto Fujiwara <makoto%ki.nu@localhost>]

I've got KURO-BOX/T4, which is U-boot-in-flash-ROM-already 
version of the TS-TGL, and found console was already out 
without pushing red button at power on.

I have some modifications to the src, to have
  atactl
  raidctl
  wd{2,3}*
  raid{0,1,2}
are in the MD kernel  (Attached).

I have tftp booted, with the  u-boot command
  bootp; tftp 1000000 altboot.bin; g 1000000 tftp:netbsd
and have raid setup (manually) before sysinst run. Then
installed the whole thing with sysinst onto raid partition.

The multi-user mode boots fine with
  bootp; tftp 1000000 altboot.bin; g 1000000 wd0a:netbsd

(Suprizingly enough, wd0a is not a root file system, but
just a boot partition include only /netbsd, but it 
finds correct (to me) root file system on raid1a.)

The next issue is boot from hd. I have small Linux Ext2
partition in second (but f:) partition on wd0. and
placed altboot.bin in it.

(wd0)
---------------
#        size    offset     fstype [fsize bsize cpg/sgs]
 a:    512064    512127     4.2BSD  1024  8192  0 # (Cyl.   508*-   1016*)
 c: 488397168         0     unused     0     0    # (Cyl.      0 - 484520)
 d:  12288528   1024191       RAID                # (Cyl.  1016*-  13207*)
 e: 475084449  13312719       RAID                # (Cyl.  13207*- 484520)
 f:    512064        63 Linux Ext2     0     0    # (Cyl.     0*-    508*)
---------------

The u-boot command is
 setenv bootcmd1
 'sata part; ext2load sata 0:1 1000000 altboot.bin; g 1000000 wd0a:netbsd'

The first 'sata part;' is the magic word to assure some timing 
for ext2load to find sata partition.

Now everything fine. Thanks the folks here, for fantastic jobs.
Really appreciate.

My misc memo in Japanese (sorry) is in my diary (of three days) at
  http://www.ki.nu/~makoto/diary/2012/04/07/

Index: distrib/sandpoint/ramdisk/Makefile
===================================================================
RCS file: /cvs/cvsroot/src/distrib/sandpoint/ramdisk/Makefile,v
retrieving revision 1.8
diff -u -r1.8 Makefile
--- distrib/sandpoint/ramdisk/Makefile  13 May 2011 19:14:17 -0000      1.8
+++ distrib/sandpoint/ramdisk/Makefile  8 Apr 2012 12:06:44 -0000
@@ -15,7 +15,7 @@
 LISTS=         ${.CURDIR}/list ${DISTRIBDIR}/common/list.sysinst
 MTREECONF=     ${DISTRIBDIR}/common/mtree.common
 IMAGEENDIAN=   be
-MAKEDEVTARGETS=        std md0 wd0 wd1 sd0 cd0 pty0 satmgr
+MAKEDEVTARGETS=        std md0 wd0 wd1 wd2 wd3 sd0 cd0 pty0 satmgr raid0 raid1 
raid2
 IMAGEDEPENDS=  ${CRUNCHBIN} \
                dot.profile \
                ${NETBSDSRCDIR}/etc/group ${NETBSDSRCDIR}/etc/master.passwd \
Index: distrib/sandpoint/ramdisk/list
===================================================================
RCS file: /cvs/cvsroot/src/distrib/sandpoint/ramdisk/list,v
retrieving revision 1.10
diff -u -r1.10 list
--- distrib/sandpoint/ramdisk/list      14 Jan 2011 10:26:35 -0000      1.10
+++ distrib/sandpoint/ramdisk/list      8 Apr 2012 12:06:45 -0000
@@ -22,6 +22,7 @@
 PROG   bin/stty
 PROG   bin/sync
 
+PROG   sbin/atactl
 PROG   sbin/chown      bin/chgrp
 PROG   sbin/disklabel
 PROG   sbin/dmesg
@@ -37,6 +38,7 @@
 PROG   sbin/mount_nfs
 PROG   sbin/newfs      sbin/mount_mfs
 PROG   sbin/ping
+PROG   sbin/raidctl
 PROG   sbin/reboot     sbin/halt
 PROG   sbin/restore    sbin/rrestore
 PROG   sbin/route

---
Makoto Fujiwara, 
Chiba, Japan, Narita Airport and Disneyland prefecture.