Re: PCI expansion card working?

[KIYOHARA Takashi <kiyohara%kk.iij4u.or.jp@localhost>]

Hi! Tim,


From: Tim Rightnour <root%garbled.net@localhost>
Date: Tue, 22 Jan 2008 23:53:10 -0700 (MST)

> On 23-Jan-2008 KIYOHARA Takashi wrote:
> > Should I compulsorily make MEM/IO of this ppb enable?
> 
> Thats the odd thing, it should have done so automatically because of
> PCI_NETBSD_CONFIGURE.  To debug that, you really need to flip the flag I
> mentioned ysterday in pci/pciconf.c.  pci_conf_debug I think it was.  I 
> believe

I found this message with pci_conf_debug=1.


  PCI: bus 0, device 22, function 0: Found dev 0x3388 0x0021 -- really probing.
  Couldn't find PNP data for bus 0 devfunc 0xb0
  PCI: bus 0, device 22, function 0: device is a bridge; not clearing enables
  PCI: bus 1, device 0, function 0: id=ffffffff: Vendor=ffff, Product=ffff
  PCI: bus 1, device 1, function 0: id=ffffffff: Vendor=ffff, Product=ffff
  PCI: bus 1, device 2, function 0: id=ffffffff: Vendor=ffff, Product=ffff
  PCI: bus 1, device 3, function 0: id=ffffffff: Vendor=ffff, Product=ffff
  PCI: bus 1, device 4, function 0: id=ffffffff: Vendor=ffff, Product=ffff
  PCI: bus 1, device 5, function 0: id=ffffffff: Vendor=ffff, Product=ffff
  PCI: bus 1, device 6, function 0: id=ffffffff: Vendor=ffff, Product=ffff
  PCI: bus 1, device 7, function 0: id=ffffffff: Vendor=ffff, Product=ffff

  ... snip ...

  PCI bus 1 - no devices


I am seen not to be able to read the configuration space of the opposite
of ppb(4) the cause in com console case.
However can read configuration space in vga console case.

I seem firmware is not support the multi function card.
hmm... I giving up.  X-<

Thanks,
--
kiyohara