Subject: IBM RS/6000 40P 6015 platform support
To: None <port-prep@netbsd.org>
From: Klaus Klein <kleink@mibh.de>
List: port-prep
Date: 06/27/2004 00:18:21
Hi folks,

I've just committed the remaining bits of IBM RS/6000 40P platform
support to the tree, which is also the first machine supported in
NetBSD using a PowerPC 601 processor.  Still missing at this time
is a driver for the included P9100-based framebuffer, but I'll get
to that as well eventually.

I've included a message buffer dump below.


Have fun,
- Klaus



>> NetBSD/prep BOOT, Revision 1.5
>> (kleink@minor-variation.et.reziprozitaet.de, Wed Jun 23 14:01:35 CEST 2004)

Boot: 
Loading in()
2800960+357476 [157936+143517]=0x34ce10
start=0x100000

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0F (GENERIC) #18: Sat Jun 26 20:11:59 CEST 2004
	kleink@minor-variation.et.reziprozitaet.de:/export/home/kleink/work/NetBSD/src/sys/arch/prep/compile/GENERIC
Model: IBM PPS Model 6015
total memory = 32768 KB
avail memory = 27352 KB
mainbus0 (root)
cpu0 at mainbus0: 601 (Revision 2), ID 0 (primary)
cpu0: HID0 808000<BD,EM>
pci0 at mainbus0 bus 0: direct-mapped configuration space access
pci0: i/o space, memory space enabled
pcib0 at pci0 dev 11 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x03)
pcib0: PIRQ[0]=15 PIRQ[1]=15
siop0 at pci0 dev 12 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at irq 13
scsibus0 at siop0: 8 targets, 8 luns per target
Weitek P9100 (VGA display) at pci0 dev 14 function 0 not configured
isa0 at pcib0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
we1 at isa0 port 0x300-0x31f iomem 0xe4000-0xe7fff irq 11
we1: WD8013EBT Ethernet (16-bit)
we1: Ethernet address 10:00:5a:2d:68:7a
pcppi0 at isa0 port 0x61
isabeep0 at pcppi0
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
biomask 2000 netmask 2800 ttymask 2880
scsibus0: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 5 lun 0: <PLEXTOR, CD-ROM PX-4XCE, 1.01> cdrom removable
cd0: async, 8-bit transfers
sd0 at scsibus0 target 6 lun 0: <IBM, DORS-31080, WA6A> disk fixed
sd0: 1034 MB, 5357 cyl, 3 head, 131 sec, 512 bytes/sect x 2118144 sectors
sd0: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers, tagged queueing
boot device: <unknown>
root on sd0a dumps on sd0b
Sat Jun 26 21:59:46 CEST 2004
swapctl: adding /dev/sd0b as swap device at priority 0
Checking for botched superblock upgrades: done.
Starting file system checks:
/dev/rsd0a: file system is clean; not checking
/dev/rsd0d: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: we-the-jury.et.reziprozitaet.de
IPv6 mode: autoconfigured host
Configuring network interfaces: we1add net default: gateway 10.1.0.1
.
Adding interface aliases:
Sending router solicitation...
Building databases...
Starting syslogd.
Checking for core dump...
savecore: no core dump
Setting date via ntp.
Starting rpcbind.
Mounting all filesystems...
Clearing /tmp.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting virecover.
starting local daemons:.
Starting lpd.
Updating motd.
Starting ntpd.
Starting sshd.
Starting inetd.
Starting cron.
Sat Jun 26 22:00:35 CEST 2004

NetBSD/prep (we-the-jury.et.reziprozitaet.de) (console)

login: root
Password:
Last login: Sat Jun 26 19:58:53 2004 on console
Jun 26 22:01:15 we-the-jury login: ROOT LOGIN (root) ON console
Jun 26 22:01:15 we-the-jury login: ROOT LOGIN (root) ON console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0F (GENERIC) #18: Sat Jun 26 20:11:59 CEST 2004
Terminal type is vt100.
We recommend creating a non-root account and using su(1) for root access.
# ps
PID TT STAT    TIME COMMAND
394 00 Ss   0:00.44 -sh 
395 00 R+   0:00.05 ps 
#