Port-powerpc archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

Bull (Motorola) Escala T604e



Hi.

I got my Bull (Motorola) Escala T604e today. It seams to be a PREP
machine. See the the OpenProm properties at the end of the mail. 
Also: I found no RTAS, that is a requirement for CHRP / RPA. 

I tried to boot a PREP kernel:
--- schnipp ---
ok boot net
Boot device: /pci@feff0090/ethernet@1  File and args: 
Select 10BaseT
[ netbsd symbol table has bad start address 0x267ffb02 ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6 (GENERIC) #0: Sun Sep  8 22:04:33 UTC 2002
    
autobuild%tgm.daemon.org@localhost:/autobuild/macppc/OBJ/autobuild/src/sys/arch/macppc/compile/GENERIC
total memory = 256 MB
avail memory = 227 MB
using 2048 buffers containing 13208 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 604ev (Revision 2.3), ID 0 (primary)
cpu0: HID0 f091c084<EMCP,DBP,EBA,EBD,DOZE,DPM,NHR,ICE,DCE,SGE,BHT>
boot device: cpu0
can't determine root device
root device (default cpu0): reboot
syncing disks... done
rebooting

ok 
--- schnapp ---
It also loads and executed the macppc ofwboot.elf fine. But I havn't 
set up a nfs-root yet.

Looks like I have a victim to hack on. Hehehehe.

Further system info:
--- schnipp ---

 debug_printf=0x00dccbec
WARNING : FLOPPY NOT READY !
        Wait to check Basic Power Supply

        BUMP FLASH - Jun. 18, 1998
        ID 03.02.0c - RESTART

       Processor 0 - WAIT_CPU_START1 after FORCED MISS !
       Processor 0 - INTERRUPT RECEIVED !
Processor 3 - WAIT_CPU_START !
       Processor 3 - INTERRUPT RECEIVED !
Slave Processor 3 started
       End of 1st reset phase. Cpu master is Processor 0 
Memory Access Test started on Bank 0 
       Processor 0 - STARTED !
       Processor 0 - VALID COMMAND !
Bank 0 Size = 256 Mbytes
       Processor 0 - STARTED !
       Processor 0 - VALID COMMAND !
Test result =  Successfully completed 
       Processor 3 - STARTED !
       Processor 3 - VALID COMMAND !
Test result =  Successfully completed 
Mbytes used :  256
       Processor 0 - STARTED !
       Processor 0 - VALID COMMAND !
       Control on all processors

I am resetting CPU# 00000003
       Processor 3 - WAIT_CPU_START !
       Processor 3 - STARTED !
       Processor 3 - VALID COMMAND !
ABQRJKLMN$#%First stand-init:
Initialize fixed vars
CIF buffers
memory node
Enable machine check exceptions
Set Memory Map
Real mode test
Client memory allocator
MMU
Root node
CPU nodes
PowerPC,604ev l2-cache PowerPC,604ev l2-cache 
isa
interrupt controller
RTC
NVRAM
SuperI/O
SIO is pc87307 
Keyboard overrides
Failed keyboard interface test
The keyboard 'Data' line is stuck low.
Probing memory
Probing PCI bus
/pci@feff0020
scsi disk tape Bull MPIC found
interrupt-controller By-pass secondary bus Reset 
By-pass disable-children
cirrus cirrus /pci@feff0090
ethernet scsi disk tape scsi disk tape ethernet MAC address: 080038221876
Checking ... /pci@feff0020
Checking ... /pci@feff0020/cirrus@5
Checking ... /pci@feff0020/interrupt-controller@3
Checking ... /pci@feff0020/scsi@2
Checking ... /pci@feff0020/isa@1
Checking ... /pci@feff0020/pci@4
Checking ... /pci@feff0020/scsi@2/tape
Checking ... /pci@feff0020/scsi@2/disk
Checking ... /pci@feff0020/isa@1/serial@i3e8
Checking ... /pci@feff0020/isa@1/8042@i60
Checking ... /pci@feff0020/isa@1/floppy@i3f0
Checking ... /pci@feff0020/isa@1/parallel@i3bc
Checking ... /pci@feff0020/isa@1/serial@m00
Checking ... /pci@feff0020/isa@1/serial@i2e8
Checking ... /pci@feff0020/isa@1/serial@i2f8
Checking ... /pci@feff0020/isa@1/serial@i3f8
Checking ... /pci@feff0020/isa@1/nvram@i74
Checking ... /pci@feff0020/isa@1/rtc@i70
Checking ... /pci@feff0020/isa@1/power-control
Checking ... /pci@feff0020/isa@1/power-status
Checking ... /pci@feff0020/isa@1/keyswitch
Checking ... /pci@feff0020/isa@1/led
Checking ... /pci@feff0020/isa@1/bump@i801
Checking ... /pci@feff0020/isa@1/nvram@mdc0000
Checking ... /pci@feff0020/isa@1/timer@i40
Checking ... /pci@feff0020/isa@1/interrupt-controller@i20
Checking ... /pci@feff0020/isa@1/dma-controller@i00
Checking ... /pci@feff0020/isa@1/8042@i60/mouse@aux
Checking ... /pci@feff0020/isa@1/8042@i60/keyboard@
Checking ... /pci@feff0090
Checking ... /pci@feff0090/ethernet@4
Checking ... /pci@feff0090/scsi@3
Checking ... /pci@feff0090/scsi@2
Checking ... /pci@feff0090/ethernet@1
Checking ... /pci@feff0090/scsi@3/tape
Checking ... /pci@feff0090/scsi@3/disk
Checking ... /pci@feff0090/scsi@2/tape
Checking ... /pci@feff0090/scsi@2/disk
Bull ESCALA T (e8ED), Serial #0, 256 MB memory

OpenFirmware (Rev.03.02.0c) by Bull HN Italia (Pregnana)


BE - 2 CPU(s) found type 604  

Please read the IDB document for this release
Copyright 1996 Bull Worldwide Information Systems  All Rights Reserved
Portions copyright 1995, 1997 FirmWorks  All Rights Reserved
Built  Tue Jun 16 18:42:48 DFT 1998

Type any key to interrupt automatic startup
Can't rewind tape
Can't rewind tape
Boot device: /pci@feff0090/ethernet@1  File and args: 
Select AUI Port
49  Retrying... Check bootp server and network setup.
[usw., usw., bis ...]
1  Retrying... Check bootp server and network setup.

ERROR: Boot load failed

... Press any key for menu


     SYSTEM MENU


   1) System Configuration
   2) Boot Operating System
   3) Reset Machine




   4) System Maintenance
   h) Help

Select: 1
     SYSTEM CONFIGURATION


   1) Set Date and Time
   2) View Hardware Configuration
   3) Probe SCSI
   4) Manage NVRAM variables
   5) Manage Operating System


   x) Return to System Menu
   h) Help

Select: 2



... Configuration Variables ...

/flash
/Planar-ID
/pci@feff0090
/pci@feff0020
/os
/cpus
/mmu
/memory@0
/aliases
/options
/openprom
/chosen
/packages
/pci@feff0090/ethernet@4
/pci@feff0090/scsi@3
/pci@feff0090/scsi@2
/pci@feff0090/ethernet@1
/pci@feff0090/scsi@3/tape
/pci@feff0090/scsi@3/disk
/pci@feff0090/scsi@2/tape
/pci@feff0090/scsi@2/disk
/pci@feff0020/cirrus@5  
/pci@feff0020/interrupt-controller@3
/pci@feff0020/scsi@2
/pci@feff0020/isa@1
/pci@feff0020/pci@4
/pci@feff0020/scsi@2/tape
/pci@feff0020/scsi@2/disk
/pci@feff0020/isa@1/serial@i3e8
/pci@feff0020/isa@1/8042@i60
/pci@feff0020/isa@1/floppy@i3f0
/pci@feff0020/isa@1/parallel@i3bc
/pci@feff0020/isa@1/serial@m00
/pci@feff0020/isa@1/serial@i2e8
/pci@feff0020/isa@1/serial@i2f8
/pci@feff0020/isa@1/serial@i3f8
/pci@feff0020/isa@1/nvram@i74
/pci@feff0020/isa@1/rtc@i70
/pci@feff0020/isa@1/power-control
/pci@feff0020/isa@1/power-status
/pci@feff0020/isa@1/keyswitch
/pci@feff0020/isa@1/led
/pci@feff0020/isa@1/bump@i801
/pci@feff0020/isa@1/nvram@mdc0000
/pci@feff0020/isa@1/timer@i40
/pci@feff0020/isa@1/interrupt-controller@i20
/pci@feff0020/isa@1/dma-controller@i00
/pci@feff0020/isa@1/8042@i60/mouse@aux
/pci@feff0020/isa@1/8042@i60/keyboard@
/os/aix
/cpus/PowerPC,604ev@3
/cpus/PowerPC,604ev@0
/cpus/PowerPC,604ev@3/l2-cache
/cpus/PowerPC,604ev@0/l2-cache
/openprom/client-services
/packages/pci
/packages/disk-label
/packages/iso9660-file-system
/packages/fat-file-system
/packages/obp-tftp
/packages/deblocker
/packages/stringio
/packages/terminal-emulator

platform-open-pic        c0040000 
aix-serial#              XANK04100211
clock-frequency          055d4a80 
aix-bus-id               00000080 
arc-identifier           PegasusPCI
name                     bull,escalat
model                    Bull ESCALA T (e8ED)
compatible               prep
#address-cells           00000001 
--- schnapp ---
-- 



tschüß,
         Jochen

Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/



Home | Main Index | Thread Index | Old Index