Port-powerpc archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: 512M RAM support
Re: 512M RAM supportThank you very much for your help.
I tried with it, but I have still some problems.
It seems to work well, ... but it falls into some unstable state.
It recognized 512M correctly.
And it always run perfectly before multiuser mode using nfs.
But when entering into multiuser mode with "exit" command under # prompt,
it stops a ceratin point, it's not fixed point.
Once it stopped after "Checking for core dump...", and once after
"savecore: no core dump (no dumpdev)" and
once it stopped at displaying "Copyright ...".
I modified sandpoint/include/vmparam.h as
"#define VM_MAX_KERNEL_ADDRESS (VM_MIN_KERNEL_ADDRESS + 2 *
SEGMENT_LENGTH - 1)"
and add upper 256M BAT mapping in sandpoint/machdep.c just as below
/* map the upper 256M area */
battable[3].batl = BATL(0x10000000, BAT_M, BAT_PP_RW);
battable[3].batu = BATU(0x10000000, BAT_BL_256M, BAT_Vs);
asm volatile ("mtibatl 3,%0; mtibatu 3,%1"
:: "r"(battable[3].batl), "r"(battable[3].batu));
asm volatile ("mtdbatl 3,%0; mtdbatu 3,%1"
:: "r"(battable[3].batl), "r"(battable[3].batu));
Under all these changes, 256M works perfect as before.
----- Original Message -----
From: Matt Thomas
To: Allen Briggs
Cc: Boo Geum Jung ; port-powerpc%netbsd.org@localhost
Sent: Wednesday, June 26, 2002 3:58 AM
Subject: Re: 512M RAM support
At 06:52 AM 6/17/2002, Allen Briggs wrote:
>On Mon, Jun 17, 2002 at 12:11:19AM -0700, Matt Thomas wrote:
> > It's not that simple. In fact, a bunch of changes need to made.
> > I'll try to get that committed sometime this week. I have those
> > changes done for 1.5.
>
>I assume these are changes to allow the kernel to occupy and use
>more than 256MB, correct? I'd like to see your changes posted here
>as a diff before they're committed. I expect that there are both
>platform-specific and generic powerpc parts to the changes. Is
>this correct?
>
>-allen
No platform specific stuff is needed. Just a few extra defines and
changes to trap_subr.S (I've avoided trap_subr_mp.S since that really
should be merged into trap_subr.S). mpc6xx/pmap.c already has the
requisite code to initialize KERNEL2_SR.
Index: include/mpc6xx/vmparam.h
===================================================================
RCS file: /cvsroot/syssrc/sys/arch/powerpc/include/mpc6xx/vmparam.h,v
retrieving revision 1.1
diff -u -r1.1 vmparam.h
--- include/mpc6xx/vmparam.h 2001/06/06 17:36:03 1.1
+++ include/mpc6xx/vmparam.h 2002/06/25 18:52:27
@@ -106,25 +106,29 @@
*/
#if 0
/*
- * Move the SR# to the top 4 bits to make the lower 19bits entirely random
+ * Move the SR# to the top 4 bits to make the lower 20 bits entirely random
* so to give better PTE distribution.
*/
#define VSID_MAKE(sr, hash) (((sr) <<
(ADDR_SR_SHFT-4))|((hash) & 0xfffff))
#define VSID_TO_SR(vsid) (((vsid) >> (ADDR_SR_SHFT-4)) &
0xF)
#define VSID_TO_HASH(vsid) ((vsid) & 0xfffff)
+#define VSID_SR_INCREMENT 0x00100000
#else
#define VSID_MAKE(sr, hash) ((sr) | (((hash) & 0xfffff) << 4))
#define VSID_TO_SR(vsid) ((vsid) & 0xF)
#define VSID_TO_HASH(vsid) (((vsid) >> 4) & 0xfffff)
+#define VSID_SR_INCREMENT 0x00000001
#endif
/*
* Fixed segments
*/
-#define USER_SR 13
-#define KERNEL_SR 14
+#define USER_SR (KERNEL_SR-1)
+#define KERNEL_SR (KERNEL2_SR-1)
+#define KERNEL2_SR 14
#define KERNEL_VSIDBITS 0xfffff
#define KERNEL_SEGMENT VSID_MAKE(KERNEL_SR,
KERNEL_VSIDBITS)
+#define KERNEL2_SEGMENT VSID_MAKE(KERNEL2_SR,
KERNEL_VSIDBITS)
#define EMPTY_SEGMENT VSID_MAKE(0, KERNEL_VSIDBITS)
#define USER_ADDR ((void *)(USER_SR << ADDR_SR_SHFT))
@@ -144,7 +148,7 @@
#define VM_MAXUSER_ADDRESS ((vaddr_t) 0x7ffff000)
#define VM_MAX_ADDRESS VM_MAXUSER_ADDRESS
#define VM_MIN_KERNEL_ADDRESS ((vaddr_t) (KERNEL_SR <<
ADDR_SR_SHFT))
-#define VM_MAX_KERNEL_ADDRESS (VM_MIN_KERNEL_ADDRESS +
SEGMENT_LENGTH)
+#define VM_MAX_KERNEL_ADDRESS (VM_MIN_KERNEL_ADDRESS +
2*SEGMENT_LENGTH)
#ifndef VM_PHYSSEG_MAX
#define VM_PHYSSEG_MAX 16
Index: powerpc/trap_subr.S
===================================================================
RCS file: /cvsroot/syssrc/sys/arch/powerpc/powerpc/trap_subr.S,v
retrieving revision 1.21
diff -u -r1.21 trap_subr.S
--- powerpc/trap_subr.S 2002/05/02 16:47:49 1.21
+++ powerpc/trap_subr.S 2002/06/25 18:52:28
@@ -672,6 +672,8 @@
mtsr USER_SR,3; \
lwz 3,PM_KERNELSR(2); \
mtsr KERNEL_SR,3; \
+ lwz 3,PM_KERNEL2SR(2); \
+ mtsr KERNEL2_SR,3; \
CPU601_KERN_LEAVE(2,3); \
1: mfsprg 2,1; /* restore cr */ \
mtcr 2; \
@@ -712,6 +714,9 @@
lis 31,KERNEL_SEGMENT@h
ori 31,31,KERNEL_SEGMENT@l
mtsr KERNEL_SR,31
+ lis 31,KERNEL2_SEGMENT@h
+ ori 31,31,KERNEL2_SEGMENT@l
+ mtsr KERNEL2_SR,31
CPU601_KERN_ENTRY(30,31)
/* Obliterate SRs so BAT spills work correctly */
lis 31,EMPTY_SEGMENT@h
@@ -885,6 +890,9 @@
lis 3,(KERNEL_SEGMENT|SR_SUKEY|SR_PRKEY)@h; \
ori 3,3,(KERNEL_SEGMENT|SR_SUKEY|SR_PRKEY)@l; \
mtsr KERNEL_SR,3; \
+ lis 3,(KERNEL2_SEGMENT|SR_SUKEY|SR_PRKEY)@h; \
+ ori 3,3,(KERNEL2_SEGMENT|SR_SUKEY|SR_PRKEY)@l; \
+ mtsr KERNEL2_SR,3; \
99: mfmsr 5; \
ori 5,5,(PSL_IR|PSL_DR|PSL_RI); \
mtmsr 5; \
@@ -940,6 +948,8 @@
mtsr 7,4 /* Restore SR7 */
lwz 4,PM_KERNELSR(3)
mtsr KERNEL_SR,4 /* Restore kernel SR */
+ lwz 4,PM_KERNEL2SR(3)
+ mtsr KERNEL2_SR,4 /* Restore kernel SR2 */
CPU601_KERN_LEAVE(3,4)
lis 3,_C_LABEL(astpending)@ha /* Test AST pending */
lwz 4,_C_LABEL(astpending)@l(3)
--
Matt Thomas Internet: matt%3am-software.com@localhost
3am Software Foundry WWW URL: http://www.3am-software.com/bio/matt/
Cupertino, CA Disclaimer: I avow all knowledge of this message
Home |
Main Index |
Thread Index |
Old Index