Port-pmax archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
5000/25
G'day,
My first foray back into PMAX in more than ten years. I've managed to get a
5000/25 with 24mb RAM (8 simm+8 simm +8 onboard ), the obligatory KN02 R3k up
and running.
System came with Ultrix 4.4, boots happily after a thorough clean and cap
replacement in the PSU.
Whinges about the battery (seems to be missing or if it's part of the RTC it's
flat). I can deal with it later.
Complains with 6.1.3 along the lines of (please excuse me re-typing this off
the vt220, I hope I didn't make any errors..):
>>boot 3/rz5/netbsd
NetBSD/pmax 6.1.3 ISO 9660 Primary Bootstrap
NetBSD/pmax 6.1.3 Secondary Bootstrap, Revision 1.5
Boot: 3/rz5/netbsd
5398960+81992=0x53a68c
Starting at 0x80030000
segment 0 start 00000000 size 01800000
phys segment: 0x18000000 @ 0
adding 0x293000 @ 0x56d000 to freelist 1
adding 0x1000000 @ 0x800000 to freelist 0
pmap_steal_memory: seg 0: 0x56d 0x56d 0x800 0x800
pid 0(system): trap: cpu0, address error (load or I-fetch) in kernel mode
status=0x80010, cause=0x30000010, epc=0x8000001c, vaddr=0xdeadbeef
tf=0x8056cce8 ksp=0x8056cd88 ra=0x800b0120 ppl=0
panic: trap
halted.
KN02-CA V2.0m (PC: 0x8000001c, SP: 0x8056caa8)
>>
I've had similar issues with 1.6.2 and 2.1.
Ideas? Constructive abuse?
Thanks.
Al.
Home |
Main Index |
Thread Index |
Old Index