For fun: I was able to bring up the wscons kernel on both PMAG-c and my
PMAG-E (which reports itself as a PMAG-D w/24 plane)

NetBSD 1.5ZB (WSCONS) #5: Wed Mar 13 17:08:44 JST 2002
    nisimura@build:/u0/current/sys/arch/pmax/compile/WSCONS
DECstation 5000/240 (3MAXPLUS)
total memory = 320 MB
avail memory = 292 MB
using 4121 buffers containing 16484 KB of memory
mainbus0 (root)
cpu0 at mainbus0: MIPS R3000A CPU (0x230) Rev. 3.0 with MIPS R3010 FPC
Rev. 4.0
cpu0: 64KB/4B direct-mapped Instruction cache, 64 TLB entries
cpu0: 64KB/4B direct-mapped write-through Data cache
tc0 at mainbus0: 25 MHz clock
ioasic0 at tc0 slot 3 offset 0x0
le0 at ioasic0 offset 0xc0000: address XX:XX:XX:XX:XX:XX
le0: 32 receive buffers, 8 transmit buffers
zsc0 at ioasic0 offset 0x100000
vsms0 at zsc0 channel 0
wsmouse0 at vsms0 (mux ignored)
zstty0 at zsc0 channel 1
zsc1 at ioasic0 offset 0x180000
lkkbd0 at zsc1 channel 0
wskbd0 at lkkbd0 (mux ignored): console keyboard
zstty1 at zsc1 channel 1
mcclock0 at ioasic0 offset 0x200000: mc146818 or compatible
asc0 at ioasic0 offset 0x300000: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at asc0: 8 targets, 8 luns per target
px0 at tc0 slot 2 offset 0x0: 8 plane, 5x1 stamp
wsdisplay0 at px0 (kbdmux ignored)
pxg0 at tc0 slot 1 offset 0x0: 24 plane, 5x1 stamp, 128kB SRAM
wsdisplay1 at pxg0 (kbdmux ignored): console (std, vt100 emulation), using
wskbd0
scsibus0: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 1 lun 0: <JVC, XR-W2010, 1.51> SCSI2 4/worm
removable
cd0: async, 8-bit transfers
sd0 at scsibus0 target 4 lun 0: <IBM OEM, 0662S12, 2 23> SCSI2 0/direct
fixed
sd0: 1003 MB, 4119 cyl, 5 head, 99 sec, 512 bytes/sect x 2055035 sectors
sd0: sync (200.0ns offset 15), 8-bit (5.000MB/s) transfers, tagged
queueing
Kernelized RAIDframe activated
label: 0
cd0: no disk label
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs


	Still need to make all those device files for wscons...