Subject: Items for sale
To: None <port-pmax@netbsd.org>
From: Brian Hechinger <wonko@entropy.tmok.com>
List: port-pmax
Date: 11/16/2000 15:47:46
a friend of mine (as well as my DEC hardware dealer) needs to dump all his
hardware ASAP due to a move, here is a note he asked me to post for him.

please contact him and not me, as i can't help you (unless you are planning to
give the hardware to me since i'm so cool)

also, i normally wouldn't post sale stuff to this list, but he's desperate.

thanks,

-brian

begin included message
----------------------

Hello fellow DEC enthusiasts...

My small DEC reseller business, CK Computer Systems, is going to be closed down again, as I'm going to be moving, so, I'm having a moving sale... Everything's got to go... 

DECstation 5000/133 with 64MB memory, 1GB 3.5" disk drive, and graphics card. 

DECstation 5000/200 with 64MB memory, 600MB 5.25" disk drive in StorageExpansion box, and graphics card. I have a limited quantity of SCSI cables, but I should have enough. 

The graphics card would be a choice of a PMAGB-BA or PMAG-C. 

I could offer either system for $75 including UPS Ground shipping to anywhere in the US. I'm offering a flat shipping cost because I don't want to deal with having to figure out how much the systems will cost to go to wherever in the US. Systems shipped to the east of the Mississippi will have more memory installed in them to compensate for the lower shipping cost.

For those local enough to pick up the system(s), I will include a DECstation 5000/125 with 32MB memory and an RZ25 en lieu of shipping costs. I'm located in Wrightsville, PA, which is approximately 2 hours west of Philly, 3 hours south-west of NYC, 1 hour north of Baltimore, 2 hours north of DC, and 4 hours east of Pittsburg. 

I will also include in either package an RZ25 (with mounting bracket) with an Ultrix 4.5 boot partition, which in this case, could be used basically to facilitate easy installation of NetBSD. The Ultrix 4.5 CD was "dd"d onto the drive, and then the rest of the drive contains the NetBSD 1.4.2 tarballs. I realize Ultrix is a "bad word" on this mailing list, but if there is anyone that uses Ultrix, I have installation and documentation CD's available. 

Let me also rattle off some of the accessories. 

I have available for free a number of PMAG-B's, to be made available to those that purchase a system. 

I have a few PMAG-D's which I can offer for $20 shipped, $15 with a system. 

I also have a couple of other graphics cards, including a PMAG-F, and a couple of PMAGC-B's (ZLX-M2). $60 each for these cards, shipped, $50 with a system.

I'm low on keyboards/mice/cabling (keyboard/mouse cable and video cable), but I could offer a set of the four for $50, to make a complete system minus a 3-BNC 1280x1024 monitor, while supplies last.

I have a large quantity (30 or 40) of MS02-AA's at a price of four for $20 including shipping, and a handful of MS02-CA's at a price of $20 including shipping. Email for quantity shipping pricing. 

I have a few PMAD-A ethernet cards available for $25, including shipping, $20 with a system. 

I do have one or two DECstation 5000/240's available, which I can set up with 96MB of memory, a 2GB disk drive in StorageExpansion, with an RRD42, and graphics card, for $125, again, including shipping.

All hardware is tested, and availability is on a first-come-first-served basis. I have about 10-15 of each type of system (125, 133, and 200). 

I'll be gone for Thanksgiving, but will be available this weekend to pack hardware up. Payment by billpoint (preferred) or direct credit card (through my wife's secure server) this weekend will allow me to get the systems shipped out before Thanksgiving. 

Please contact me at chris@ckcomputersystems.com. 

Thanks,
Chris