Quoting Josh Davidson <dogtoy@ductape.net>:

> Quoting "Aaron J. Grier" <agrier@poofygoof.com>:
> 
> > On Sun, May 21, 2000 at 07:55:50AM -0500, Josh Davidson wrote:
> > > ok, i've made the cable, but i can't get it to work.  I have made a
> > > mouse terminator and removed the huge frame buffer SIMM, but no luck.
> > 
> > how do you have it wired?  Do you have pins 3&4 on the MMJ connected
> > together?  Have you inadvertently flipped the TX and RX lines?
> 
> I have pins 3&4 wired to DB-25 pin 7, pin 2(TX) wired to DB-25 pin 3 (the
> RX on 
> the tty, because it needs to be cross-over right?), and pin 5(RX) wired to
> DB-25 
> pin 2 (TX on tty, crossover, same as before).  Is this right??

Which pin is pin 1(MMJ)?  I would think it was the first on the left (if you are 
looking at the back of the machine).  Just thought this needed to be clarified 
since this could make a big difference to my wiring. (ie: if pin 1 was the first 
to the right, my wiring would all be backwards)

Thanks,


/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-
Josh Davidson               **    **  ****   **   ******  **  **
Sys/Net Admin               **    **  ** **  **     **     ****
PHAT Beach Records          **    **  **  ** **     **     ** **
                             ******   **   ****   ******  **   **
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-