"emanuel stiebler" <emu@ecubics.com> wrote:
> ----- Original Message -----
> From: Thomas Graichen <news-list.netbsd.port-pmax@innominate.de>
> To: <port-pmax@NetBSD.org>
> Sent: Monday, January 03, 2000 00:42
> Subject: dead 5000/200 - any ideas


>> now the bad one: looks like my 5000/200 died over newyear
>> symptoms so far are: no picture on the monitor (cfb) and nothing
>> happening even if i type in boot blindly on the keyboard - also
>> all the diagnostic led's next to the reset button are on forever
>>
>> i also tried to unplug monitor and keyboard/mouse and looked at
>> the serial ports - but nothing happens there too - ah and one last
>> diagnostic thing: the keyboard is still beeping (don't knwo who
>> is doing that on the pmax - the keyboard or the base board)

> remove all cards, remove most of your ram (if you have tons of it), check if
> any of the ICs, which are socketed, are loose, move them a little, check the
> power supply, which voltages are on.

removed everything - nothing happens still all led's are on

does anyone know what voltages should be on the various power-
supply cables ?

> because you say, that all LEDs are ON, the workstation stops already at a
> very beginning ...

> check with the nearly empty box, and tell if anything on the LEDS is
> changing ...

still the same - all lights are on

t

-- 
graichen@innominate.de
                                                        innominate AG
                                                    networking people
fon: +49.30.308806-13 fax: -77 web: http://innominate.de pgp: /pgp/tg