On Mon, 29 Jun 1998, Paul Mather wrote:

> Your DS3100 is failing at subtest 2, which is the network interface
> (LANCE) test.  I had exactly the same problem with my DS3100 until I
> installed an ethernet loopback terminator, and then all was rosy (until
> my monitor died a couple of months later, that is; it was nice while it
> lasted though;).
> 
> Installing either a thick- or a thin-wire terminator should solve this
> problem.  Also, make sure the "ethernet button" between the two
> connectors is set appropriately to select thin- or thick-wire.  Of
> course, if you *are* currently connected to an ethernet, it may just be
> a matter of pushing the button to select the appropriate connector.
> 
This was indeed the problem. The thin-net connector was loose :)

Thanks

rob

------------------------------------------------------------------------------
"Off the keyboard, through the CPU, | deker@digex.net 
out the transceiver, down the rj45  | Senior Operations Engineer
line, across the router, through    | 
the Hub, out the gateway.           |  
        Nothing but net."           | 
-----------------------------------------------------------------------------