Re: X problem on PMAGB-B

[Michael <macallan1888%gmail.com@localhost>]

Hello,

On Wed, 12 Nov 2025 16:20:29 -0800
Jason Thorpe <thorpej%me.com@localhost> wrote:

> +macallan

> Oh, c’mon, give them a bit of a break.  The X.org server NetBSD ships
> with supports lots of dumb linear frame buffers (some dumber than
> others!), largely because NetBSD people put in the effort.  It’s
> probably something fairly minor, or perhaps some bit-rot in the
> “wscons-ification” of the PMAGB-B driver (“sfb”, I think).

ENOHW, so can't reproduce, but from what I gathered from reading the thread:
- the working Xserver was a specialized server with built-in support
  for DEC hardware?
- someone switched to Xorg and now we're broken?

The monitor losing sync is odd though, with hw like that we usually
don't switch video modes. Colour depth maybe, or image planes vs.
overlay. The hw/dec code in xf86 3.3.6 seems to do just that.

Since nobody mentioned which kernel driver attached, I have to guess
dev/tc/sfb.c or sfbplus.c. Neither does any video mode programming,
just restoring stuff when switching back to terminal emulation.

looking at sfbmmap() though:
	if (offset >= 0x1000000 || offset < 0) /* XXX 16MB XXX */
		return (-1);
	return machine_btop(sc->sc_vaddr + offset);

... a whole 16MB chunk, apparently expecting VRAM at the beginning.
Looking at sfbreg.h:
#define	SFB_ASIC_OFFSET		0x0100000	/* SFB ASIC Control Registers */
#define	SFB_ASIC_SIZE		0x0020000
#define	SFB_RAMDAC_OFFSET	0x01c0000	/* BrookTree RAMDAC */
#define	SFB_RAMDAC_SIZE		0x0040000
... this here:
#define	SFB_FB_OFFSET 		0x0200000	/* Frame
buffer */ #define	SFB_FB_SIZE		0x0200000
... seems to indicate 2MB FB space at 2MB into the slot's space.
With registers in the first 2MB. If we hand that to wsfb it will assume
VRAM starts at 0 and happily trample over a bunch of registers which may
well make the hw freak out and the monitor lose sync.
At the very least sfbmmap should return 
machine_btop(sc->sc_vaddr + SFB_FB_OFFSET + offset);
when in dumb fb mode.

Disclaimer: I am completely unfamiliar with the hardware, this is
purely guesswork based on experience with a lot of other hardware of
similar vintage.

have fun
Michael