I'm sorry for sending junk mails many times.
Sending from "gmail.com" are confusing.

The sources were almost latest(updated 3days ago).
"machfb0" appears many times since 07/08/2007.

I confirmed netbsd-INSTALL.gz(NetBSD-4.0_RC4) boots with genfb0, now.
Tomorrow, I'll install RC4 and report that GENERIC kernel boots or
not.

Thanks.
Masafumi Hotta

The message I've sent many times is below.

Hello.

I updated to -current to use r128fb, 3days ago on my iBook SE.
There were some problems to report.

1: GENERIC kernel doesn't boot.

  It stops at configuring firewire.
  But dmesg message ended.

NetBSD 4.99.36 (GENERIC) #0: Sat Nov 17 12:32:08 JST 2007
        tyan@tyan.masafumi:/home/tyan/macppc/obj/sys/arch/macppc/compile/GENERIC
total memory = 576 MB
avail memory = 544 MB
timecounter: Timecounters tick every 10.000 msec
found openpic PIC at 80040000
OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 0.2), ID 0 (primary)
cpu0: HID0 8090c0a4<EMCP,DOZE,DPM,ICE,DCE,SGE,BTIC,BHT>, powersave: 1
cpu0: 466.67 MHz, 512KB WB L2 cache
uni_n0 at mainbus0 address 0xf8000000
ki2c0 at uni_n0 address 0xf8001000
iic0 at ki2c0: I2C bus
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Interface (rev. 0x00)
machfb0 at pci0 dev 16 function 0: ATI Technologies Rage Mobility M3 (AGP) (rev.
 0x02)
machfb0: 64 MB aperture at 0x94000000, 16 KB registers at 0x90000000
machfb0: 16384 KB (unknown type) 14.318 MHz, maximum RAMDAC clock 230 MHz
machfb0: chip ID mismatch, 0xff7f != 0x4c46
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)

2: kernel without machfb stops.
     The kernel (comment out machfb)left this message.
     This is the last part of it.