Hello.

I'd like to use current with ibook G3 466MHz with firewire,
get the latest source today and tryed to boot the kernel (cross
compiled on i386).

But it panics

-------------------------------------------------------------
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
panic: cnopen: no console device
Stopped in pid 16.1 <init> at   netbsd:cpu_Debugger+0x10:   Lwz   r0,
r1, 0x14
db> bt
0xd964bcb0: at panic+0x1b4
0xd964bd00: at cnopen+0x12c
0xd964bd30: at spec_open+0x204
0xd964bd70: at VOP_OPEN+0x38
0xd964bda0: at vn_open+0x200
0xd964be40: at sys_open+0xe0
0xd964bee0: at syscall_plain+0x1f0
0xd964bf40: user SC trap #5 by 0xefec7e0c: srr1=0xd032
                        r1=0xffffddd0 cr=0x20000082 xer=0 ctr=0xefec7e04

db>
-----------------------------------------------------------------
This is my first post and thanks for reading.

Masafumi Hotta


Here is dmesg on 3.1

-----------------------------------------------------------------
NetBSD 3.1 (GENERIC) #0: Tue Oct 31 05:09:13 UTC 2006
        builds@b1.netbsd.org:/home/builds/ab/netbsd-3-1-RELEASE/macppc/200610302
053Z-obj/home/builds/ab/netbsd-3-1-RELEASE/src/sys/arch/macppc/compile/GENERIC
total memory = 192 MB
avail memory = 175 MB
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 2.2), ID 0 (primary)
cpu0: HID0 8090c0a4<EMCP,DOZE,DPM,ICE,DCE,SGE,BTIC,BHT>
cpu0: 466.67 MHz, 512KB WB L2 cache
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Interface (rev. 0x00)
ofb0 at pci0 dev 16 function 0: ATI Technologies Rage Mobility M3 (AGP)
ofb0: 800 x 600, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
enabling KeyLargo internal modem
i2s at obio0 offset 0x10000 not configured
zsc0 at obio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
adb0 at obio0 offset 0x16000 irq 47: 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: PowerBook G3 keyboard (Japanese layout)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: buttons
apm0 at adb0: battery flags 0x4, 76% charged
battery at obio0 offset 0x0 not configured
backlight at obio0 offset 0xf300 not configured
wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer
atabus0 at wdc0 channel 0
wdc1 at obio0 offset 0x20000 irq 20: DMA transfer
atabus1 at wdc1 channel 0
wdc2 at obio0 offset 0x21000 irq 21: DMA transfer
atabus2 at wdc2 channel 0
ohci0 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev. 0x
00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev. 0x
00)
ohci1: can't map mem space
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
fwohci0 at pci2 dev 14 function 0: Apple Computer product 0x0018 (rev. 0x01)
fwohci0: interrupting at irq 40
fwohci0: OHCI 0.0, ff:65:30:00:c0:a3:bb:fe, 100Mb/s, 2 max_rec, 4 ir_ctx, 4 it_c
tx
gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x01)
gem0: interrupting at irq 41
gem0: Ethernet address 00:30:65:bb:a3:c0, 10KB RX fifo, 4KB TX fifo
bmtphy0 at gem0 phy 0: BCM5201 10/100 media interface, rev. 2
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Kernelized RAIDframe activated
fw0 at fwohci0: ff:65:30:00:c0:a3:bb:fe:00:00:ff:ff:f0:01:00:00
fw0: maximum receive packet (2) is too small
wd0 at atabus0 drive 0: <IBM-DJSA-210>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9590 MB, 19485 cyl, 16 head, 63 sec, 512 bytes/sect x 19640880 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using 
DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-ROM SR-8174, , C113> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: clock gained 21 days -- CHECK AND RESET THE DATE!

-----------------------------------------------------------------------------------