-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

On Nov 28, 2006, at 08:48, Radek Kujawa wrote:

> Hello.
>  Today I installed daily build (20061126) of NetBSD 4.99.4 on a 
> PowerBook 3400c with OF 2.0.1. Sysinst went without problems, but 
> after installation I cannot boot anymore:
>
> 0 > setenv auto-boot? false
> 0 > setenv real-base F00000
> 0 > setenv load-base 600000
> 0 > setenv boot-device /bandit/ohare/ata/ata-disk@0,0:0
> 0 > setenv boot-file netbsd
> 0 > reset-all
>
> After reboot I issued boot command:
> 0 > boot
> OF_open bootpath=/bandit/ohare/ata/ata-disk@0,0
> read stage 2 blocks: 0123456. done!
> starting stage 2...
> DEFAULT CATCH!, code=FFF00700 at %SRR0: 00E00000 %SRR1: 00083070
>
> I looked at PR 27110, and it looks kinda similar.

How big is the kernel image? If it's more than 5MB that's likely the 
problem.

> Before installation of 4.99.4 this PB was running NetBSD 
> 2.0.something, and it was quite stable. Unfortunately, now I'm stuck - 
> this PB has no onboard ethernet or internal CD. I installed 4.99.4 by 
> booting netbsd-INSTALL from existing NetBSD partition. Looks like I 
> have to search around for PCMCIA-CompactFlash adapter. I hope booting 
> from PCMCIA still works (long time ago I installed NetBSD 1.6.2 this 
> way).

Or boot it in target disk mode ( hold down T when powering up ) and 
repair things that way.
Onboard Ethernet wouldn't help much - OpenFirmware doesn't support it ( 
at least not on mine - NetBSD sees a tlp, OF sees /bandit/pci???? )

have fun
Michael
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (Darwin)

iQEVAwUBRWxsgcpnzkX8Yg2nAQJ2SQf/aDTBVmfAvt9iOFY9JGpFi8AW6D1s5mYv
eiRZ12juMVArvUcry5Uieb0jpYcXm1Y1B2L5g4vCE2rzfpcMkmGvyCBBfp2wPV7Z
9jJ3m+iv8jIjvn8SyzgoP/Q7xwPClrNJE+PqX6jVU4fy/z1W2WWHJ3C54eo+Y7Lh
jqgJG7PBAvgetkpsfnCIiKC1kXAjNoSTwdCqbkNtLENBQ2KsSaJO9wbZaC6u4FzQ
3BWVZV4Prk3YoacBmCIkD9rngdHsDMwYwcjIdv2r3jINxl5iSsiNpGDICGjYlELl
EDCcbOOsEqntufZICfmk/L8o0VRAYjFHmddP0empGSMQ9t9tDlD5dw==
=d223
-----END PGP SIGNATURE-----