Hi,

I`ve downloaded the 3.1_RC2 installation  CD and booted it up on my eMac. The eMac is:

eMac G4 1.25GHz / USB 2.0 / ATI 9200 / PowerPC 7447A

The installation disc booted just fine and everything went OK. I`ve also tested the `gem0' driver transferring some large file across the LAN and it worked without any problems and at the max speed for a 100 Mbps Ethernet network .

Also the `reboot' worked just fine, so I guess that power management is doing well.

I`d also like to do a normal installation of NetBSD 3.1_RC2 and build a kernel to test the `snapper' audio; and also the X server. I`ll post here the results if I do so.

The clock in NetBSD 2.1 suffers from this problem: http://mail-index.netbsd.org/port-macppc/2006/06/21/0001.html ; I might do some tests on NetBSD 3.1_RC to test how it works.

Here is the dmesg:

NetBSD 3.1_RC2 (INSTALL) #0: Sun Sep  3 20:20:59 UTC 2006
	builds@b4.netbsd.org:/home/builds/ab/netbsd-3-1-RC2/macppc/200609031430Z-obj/home/builds/ab/netbsd-3-1-RC2/src/sys/arch/macppc/compile/INSTALL
total memory = 768 MB
avail memory = 733 MB
mainbus0 (root)
cpu0 at mainbus0: 7447A (Revision 1.1), ID 0 (primary)
cpu0: HID0 8450c0bc<EMCP,EICE,NAP,DPM,ICE,DCE,SGE,BTIC,FBIOB,ABE,BHT>
cpu0: 1250.00 MHz, 512KB L2 cache
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: vendor 0x106b product 0x0034 (rev. 0x00)
ofb0 at pci0 dev 16 function 0: vendor 0x1002 product 0x5962
ofb0: 1024 x 768, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: vendor 0x106b product 0x0035 (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x10000 not configured
adb0 at obio0 offset 0x16000 irq 47: pm_adb_op: timeout. command = 0x0
0 targets
wdc0 at obio0 offset 0x20000 irq 24: DMA transfer
atabus0 at wdc0 channel 0
ohci0 at pci1 dev 24 function 0: vendor 0x106b product 0x003f (rev. 0x00)
ohci0: can't map mem space
ohci1 at pci1 dev 25 function 0: vendor 0x106b product 0x003f (rev. 0x00)
ohci1: can't map mem space
ohci2 at pci1 dev 26 function 0: vendor 0x106b product 0x003f (rev. 0x00)
ohci2: interrupting at irq 29
ohci2: OHCI version 1.0, legacy support
usb0 at ohci2: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x106b OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci3 at pci1 dev 27 function 0: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci3: interrupting at irq 63
ohci3: OHCI version 1.0
usb1 at ohci3: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci4 at pci1 dev 27 function 1: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci4: interrupting at irq 63
ohci4: OHCI version 1.0
usb2 at ohci4: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
vendor 0x1033 product 0x00e0 (USB serial bus, interface 0x20, revision 0x04) at pci1 dev 27 function 2 not configured
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: vendor 0x106b product 0x0036 (rev. 0x00)
wdc1 at pci2 dev 13 function 0: interrupting at irq 39
atabus1 at wdc1 channel 0
vendor 0x106b product 0x0031 (Firewire serial bus, interface 0x10, revision 0x81) at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0: vendor 0x106b product 0x0032 (rev. 0x80)
gem0: interrupting at irq 41
gem0: Ethernet address 00:0d:93:57:39:60, 10KB RX fifo, 4KB TX fifo
bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
md0: internal 2048 KB image area
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST RW/DVD GCC-4481B, , 2.05> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
uhub3 at uhub1 port 1uhidev0 at uhub2 port 1 configuration 1 interface 0
uhub3: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.10, addr 2

uhidev0: Logitech Apple Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
uhub3: 3 ports with 2 removable, bus powered
uhid at uhidev0 not configured
uhidev1 at uhub3 port 3 configuration 1 interface 0
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 3, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub3 port 3 configuration 1 interface 1
uhidev2: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 3, iclass 3/0
uhidev2: 3 report ids
uhid at uhidev2 reportid 2 not configured
uhid at uhidev2 reportid 3 not configured
wd0 at atabus1 drive 0: <ST340015A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 5 days -- CHECK AND RESET THE DATE!

For comparison, this is the `dmesg' of a NetBSD 2.1 kernel:

NetBSD 2.1 (EMAC) #0: Sun Nov 27 19:10:11 UTC 2005
	root@ununhexium:/usr/src/sys/arch/macppc/compile/EMAC
total memory = 768 MB
avail memory = 734 MB
mainbus0 (root)
cpu0 at mainbus0: Version 0x8003 (Revision 0x0101), ID 0 (primary)
cpu0: HID0 8410c09c<EMCP,EICE,DPM,ICE,DCE,SGE,FBIOB,ABE,BHT>
cpu0: 1250.00 MHz, 256KB L2 cache
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
ofb0 at pci0 dev 16 function 0: ATI Technologies product 0x5962
ofb0: 1024 x 768, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at obio0 offset 0x10000snapper0: irq 30,1,2
adb0 at obio0 offset 0x16000 irq 47: pm_adb_op: timeout. command = 0x0
0 targets
apm0 at adb0: battery flags 0x9, 0% charged
ki2c0 at obio0
wdc0 at obio0 offset 0x20000 irq 24: DMA transfer
atabus0 at wdc0 channel 0
ohci0 at pci1 dev 24 function 0: Apple Computer product 0x003f (rev. 0x00)
ohci0: can't map mem space
ohci1 at pci1 dev 25 function 0: Apple Computer product 0x003f (rev. 0x00)
ohci1: can't map mem space
ohci2 at pci1 dev 26 function 0: Apple Computer product 0x003f (rev. 0x00)
ohci2: interrupting at irq 29
ohci2: OHCI version 1.0, legacy support
usb0 at ohci2: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43)
ohci3: interrupting at irq 63
ohci3: OHCI version 1.0
usb1 at ohci3: USB revision 1.0
uhub1 at usb1
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43)
ohci4: interrupting at irq 63
ohci4: OHCI version 1.0
usb2 at ohci4: USB revision 1.0
uhub2 at usb2
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
NEC USB Host Controller (USB serial bus, interface 0x20, revision 0x04) at pci1 dev 27 function 2 not configured
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
wdc1 at pci2 dev 13 function 0: interrupting at irq 39
atabus1 at wdc1 channel 0
fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81)
fwohci0: interrupting at irq 40
fwohci0: OHCI 1.1, 00:0d:93:ff:fe:57:39:60, 400Mb/s, 2048 max_rec, 8 ir_ctx, 8 it_ctx
gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80)
gem0: interrupting at irq 41
gem0: Ethernet address 00:0d:93:57:39:60, 10KB RX fifo, 4KB TX fifo
bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
audio0 at snapper0: full duplex
atapibus0 at atabus0: 2 targets
fw0 at fwohci0: 00:0d:93:ff:fe:57:39:60:0a:02:ff:ff:f0:01:00:00
cd0 at atapibus0 drive 0: <HL-DT-ST RW/DVD GCC-4481B, , 2.05> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhub3 at uhub1 port 1uhidev0 at uhub2 port 1 configuration 1 interface 0
uhub3: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.10, addr 2

uhidev0: Logitech Apple Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
uhub3: 3 ports with 2 removable, bus powered
ums0 at uhidev0: 1 button
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 3 configuration 1 interface 0
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 3, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub3 port 3 configuration 1 interface 1
uhidev2: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 3, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
wd0 at atabus1 drive 0: <ST340015A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs


--------------------------------------------------------------
Marco Trillo
marcotrillo@gmail.com
http://artemis.tmdel.ath.cx/