On Tue, Oct 04, 2005 at 06:49:07AM -0400, Michael wrote:
> But that's a Mac Mini, and the device is connected to an 'Apple Computer
> Intrepid USB Controller' which is strictly internal. All external ports
> are handled by 'NEC USB Host Controller'. So whatever this is it's built
> into the Mini too. More evidence that the Mini is actually an iBook in a
> lunchbox ;)
> 
> Could you post your whole dmesg output? Or at least the part about USB
> devices? I'd like to see what the other uhidev*s are, maybe we're
> missing something.

Ok.
Here the dmesg output, almost full, with

NetBSD mahogany 3.99.9 NetBSD 3.99.9 (GENERIC) #0: Fri Sep 30 15:11:55 CEST 2005  tonio@arcelot.loria.fr:/usr/obj/sys/arch/macppc/compile/GENERIC macppc

Hope it helps,
antoine

total memory = 1280 MB
avail memory = 1228 MB
mainbus0 (root)
cpu0 at mainbus0: 7447A (Revision 1.2), ID 0 (primary)
cpu0: HID0 8450c0bc<EMCP,EICE,NAP,DPM,ICE,DCE,SGE,BTIC,FBIOB,ABE,BHT>
cpu0: 752.32 MHz, 512KB L2 cache
uni_n0 at mainbus0 address 0xf8000000
hw-clock at uni_n0 not configured
ki2c0 at uni_n0 address 0xf8001000
iic0 at ki2c0: I2C bus
i2c-bus at ki2c0 address 0x1 not configured
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
ofb0 at pci0 dev 16 function 0: Nvidia product 0x0329
ofb0: 1024 x 768, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
Broadcom product 0x4320 (miscellaneous network, revision 0x03) at pci1 dev 18 function 0 not configured
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x0 not configured
adb0 at obio0 offset 0x16000 irq 47: 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: mapped device (196)
wskbd0 at akbd0: console keyboard, using wsdisplay0
abtn0 at adb0 addr 7: buttons
apm0 at adb0: battery flags 0x5, 97% charged
battery at obio0 offset 0x0 not configured
backlight at obio0 offset 0xf300 not configured
ki2c1 at obio0
iic1 at ki2c1: I2C bus
i2c-bus at ki2c1 address 0x0 not configured
wdc0 at obio0 offset 0x20000 irq 24: DMA transfer
atabus0 at wdc0 channel 0
ohci0 at pci1 dev 24 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci0: can't map mem space
ohci1 at pci1 dev 25 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci1: can't map mem space
ohci2 at pci1 dev 26 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci2: interrupting at irq 29
ohci2: OHCI version 1.0, legacy support
usb0 at ohci2: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci3 at pci1 dev 27 function 0: NEC USB Host Controller (rev. 0x43)
ohci3: interrupting at irq 63
ohci3: OHCI version 1.0
usb1 at ohci3: USB revision 1.0
uhub1 at usb1
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci4 at pci1 dev 27 function 1: NEC USB Host Controller (rev. 0x43)
ohci4: interrupting at irq 63
ohci4: OHCI version 1.0
usb2 at ohci4: USB revision 1.0
uhub2 at usb2
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci1 dev 27 function 2: NEC USB Host Controller (rev. 0x04)
ehci0: interrupting at irq 63
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci3 ohci4
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
wdc1 at pci2 dev 13 function 0: interrupting at irq 39
atabus1 at wdc1 channel 0
fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x81)
fwohci0: interrupting at irq 40
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:11:24:ff:fe:89:41:56
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x80)
gem0: interrupting at irq 41
gem0: Ethernet address 00:11:24:89:41:56, 10KB RX fifo, 4KB TX fifo
bmtphy0 at gem0 phy 0: BCM5221 10/100 media interface, rev. 4
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITACD-RW  CW-8123, , CA14> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
ehci0: handing over low speed device on port 1 to ohci3
uhub3: port 1, device disappeared after reset
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Apple Computer product 0x1000, rev 2.00/17.92, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
uhidev1 at uhub1 port 1 configuration 1 interface 0
uhidev1: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 1 configuration 1 interface 1
uhidev2: Apple Computer product 0x1000, rev 2.00/17.92, addr 2, iclass 3/1
ums0 at uhidev1: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
ums1 at uhidev2: 5 buttons
wsmouse1 at ums1 mux 0
uhidev3 at uhub0 port 2 configuration 1 interface 0
uhidev3: Apple Computer Apple Internal Trackpad, rev 2.00/0.06, addr 3, iclass 3/1
uhid0 at uhidev3: input=81, output=0, feature=16
wd0 at atabus1 drive 0: <Hitachi HTS541060G9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs