Subject: Re: Correct keyboard type for Powerbook G3 with XFree86 4.5.0?
To: None <port-macppc@NetBSD.org>
From: Thomas Klausner <wiz@NetBSD.org>
List: port-macppc
Date: 06/17/2005 19:38:22
--r5Pyd7+fXNt84Ff3
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Fri, Jun 17, 2005 at 07:37:46PM +0200, Thomas Klausner wrote:
> My XF86Config and XFree86.0 log file are
> attached.
This time.
Thomas
--r5Pyd7+fXNt84Ff3
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=XF86Config
#
# XF86Config example
#
# The ordering of sections is not important in version 4.0 and later.
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
# **********************************************************************
# Server flags section. This contains various server-wide Options.
# **********************************************************************
Section "ServerFlags"
Option "blank time" "10" # 10 minutes
Option "standby time" "20"
Option "suspend time" "30"
Option "off time" "60"
# Option "PCI type" "UniNorth"
# Option "PCI type" "Bandit"
Option "PCI type" "Grackle"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "Protocol" "wskbd"
Option "Device" "/dev/wskbd0"
# Option "AutoRepeat" "500 5"
Option "XkbRules" "xfree86"
Option "XkbModel" "macusb"
# Option "XkbModel" "macadb"
# Option "XkbModel" "standard"
Option "XkbLayout" "us"
# Option "XkbVariant" "altjp"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "ZAxisMapping" "4 5"
# Option "Device" "/dev/wsmouse0"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic Monitor"
# HorizSync 27-82 # multisync
# VertRefresh 30-72 # multisync
Option "dpms"
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_screen" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "mmio_cache" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
Identifier "Mach64"
Driver "ati"
# Driver "r128"
VendorName "ATI Technologies Inc"
# BoardName "Mach64 LI"
BoardName "3D Rage LT Pro"
ChipSet "ati"
ChipId 0x4c49
# ChipRev 0xdc
BusID "PCI:0:17:0"
# Chipset "mach64"
# Identifier "Mach64"
# Driver "ATI"
# BusID "PCI:0:17:0"
Option "noaccel"
# Option "LcdSync"
# Option "XaaNoMono8x8PatternFillRect"
# Option "XaaNoScanlineCPUToScreenColorExpandFill"
# Option "SWCursor"
EndSection
# **********************************************************************
# Screen sections.
# **********************************************************************
Section "Screen"
Identifier "Screen1"
Device "Mach64"
Monitor "Generic Monitor"
# XXX 24bpp may be broken
# DefaultDepth 8
DefaultDepth 16
# DefaultDepth 24
#SubSection "Display"
#Depth 16
#Modes "800x600"
#EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768"
EndSubSection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
Identifier "Main Layout"
Screen "Screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# **********************************************************************
# Module section
# **********************************************************************
Section "Module"
Load "extmod"
Load "freetype"
Load "glx"
Load "dbe"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
--r5Pyd7+fXNt84Ff3
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="XFree86.0.log"
Content-Transfer-Encoding: quoted-printable
XFree86 Version 4.5.0
Release Date: 16 March 2005
X Protocol Version 11, Revision 0
Build Operating System:NetBSD/macppc 3.99.3 - The NetBSD Foundation, Inc.
Current Operating System: NetBSD kraftlackel 3.99.3 NetBSD 3.99.3 (KRAFTLAC=
KEL) #0: Fri May 20 20:40:36 CEST 2005 wiz@hiro.nih.at:/usr/obj/src.macppc=
/sys/arch/macppc/compile/KRAFTLACKEL macppc
Build Date: 19 May 2005
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Command line: /usr/X11R6/bin/X :0 -dpi 100 -depth 16
Markers: (--) probed, (**) from config file, (=3D=3D) default setting,
(++) from command line, (!!) notice, (EE) error, (WW) warning,
(II) informational, (NI) not implemented, (??) unknown.
(=3D=3D) Log file: "/var/log/XFree86.0.log", Time: Fri Jun 17 17:33:46 2005
(=3D=3D) Using config file: "/usr/X11R6/lib/X11/XF86Config".
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.3
XFree86 Video Driver: 0.8
XFree86 XInput driver : 0.5
XFree86 Server Extension : 0.3
XFree86 Font Renderer : 0.5
(II) Loader running on netbsd
(**) Option "Protocol" "wskbd"
(**) Option "Device" "/dev/wskbd0"
(**) Keyboard: Protocol: wskbd
(--) Keyboard type: ADB
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "macusb"
(**) XKB: model: "macusb"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(=3D=3D) Keyboard: CustomKeycode disabled.
(=3D=3D) ServerLayout "Main Layout"
(=3D=3D) |-->Screen "Screen1" (0) (0, 0)
(**) | |-->Device "Mach64"
(**) | |-->Monitor "Generic Monitor" (0)
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fo=
nts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts=
/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/=
CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/=
X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "BlankTime" "10"
(**) Option "StandbyTime" "20"
(**) Option "SuspendTime" "30"
(**) Option "OffTime" "60"
(II) Checking for unused ServerFlags options:
(WW) Option "PCI type" is not used
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.0.0
ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Bitmap
(--) Using wscons driver
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1057,0002 card 0000,0000 rev 40 class 06,00,00 hdr =
00
(II) PCI: 00:0e:0: chip 11c1,5801 card 11c1,5801 rev 12 class 0c,03,10 hdr =
00
(II) PCI: 00:0f:0: chip 123f,8888 card 123f,8888 rev 02 class 04,80,00 hdr =
00
(II) PCI: 00:10:0: chip 106b,0017 card 0000,0000 rev 00 class ff,00,00 hdr =
00
(II) PCI: 00:11:0: chip 1002,4c49 card 0000,0000 rev dc class 03,00,00 hdr =
00
(II) PCI: 00:13:0: chip 104c,ac1e card fffc,ffff rev 00 class 06,07,00 hdr =
02
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 1: bridge is at (0:19:0), (0,1,1), BCTRL: 0x0740 (VGA_EN is cleare=
d)
(--) PCI:*(0:17:0) ATI Technologies Inc 3D Rage LT Pro rev 220, Mem @ 0x810=
00000/24, 0x80881000/12, I/O @ 0x0c00/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0x80800000 - 0x80ffffff (0x800000) MX[B]E
[1] -1 0 0x80882000 - 0x80883fff (0x2000) MX[B]E
[2] -1 0 0x80881000 - 0x80881fff (0x1000) MX[B](B)
[3] -1 0 0x81000000 - 0x81ffffff (0x1000000) MX[B](B)
[4] -1 0 0x00000c00 - 0x00000cff (0x100) IX[B]E
[5] -1 0 0x00000c00 - 0x00000cff (0x100) IX[B](B)
(II) PCI Memory resource overlap reduced 0x80800000 from 0x80ffffff to 0x80=
87ffff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x80800000 - 0x8087ffff (0x80000) MX[B]E
[1] -1 0 0x80882000 - 0x80883fff (0x2000) MX[B]E
[2] -1 0 0x80881000 - 0x80881fff (0x1000) MX[B](B)
[3] -1 0 0x81000000 - 0x81ffffff (0x1000000) MX[B](B)
[4] -1 0 0x00000c00 - 0x00000cff (0x100) IX[B]E
[5] -1 0 0x00000c00 - 0x00000cff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0 0x80800000 - 0x8087ffff (0x80000) MX[B]E
[3] -1 0 0x80882000 - 0x80883fff (0x2000) MX[B]E
[4] -1 0 0x80881000 - 0x80881fff (0x1000) MX[B](B)
[5] -1 0 0x81000000 - 0x81ffffff (0x1000000) MX[B](B)
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[8] -1 0 0x00000c00 - 0x00000cff (0x100) IX[B]E
[9] -1 0 0x00000c00 - 0x00000cff (0x100) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor=3D"The XFree86 Project & the After X-TT Projec=
t"
compiled for 4.5.0, module version =3D 2.1.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.0.0
ABI class: XFree86 Server Extension, version 0.3
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.0.0
ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.5
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 6.5.12
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.8
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.5
(II) ATI: ATI driver (version 6.5.12) for chipset: ati
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP)
(II) Primary Device is: PCI 00:11:0
(II) ATI: Candidate "Device" section "Mach64".
(II) ATI: Shared PCI/AGP Mach64 in slot 0:17:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 0:17:0 assigned to active "Device"=
section "Mach64".
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 6.5.12
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.8
(WW) ****INVALID IO ALLOCATION**** b: 0xc00 e: 0xcff correcting=07
(II) window:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
[0] -1 0 0x00000000 - 0xffffffff (0x0) IX[B]
(II) window fixed:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0 0x80800000 - 0x8087ffff (0x80000) MX[B]E
[3] -1 0 0x80882000 - 0x80883fff (0x2000) MX[B]E
[4] -1 0 0x80881000 - 0x80881fff (0x1000) MX[B](B)
[5] -1 0 0x81000000 - 0x81ffffff (0x1000000) MX[B](B)
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B](B)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] -1 0 0x00000c00 - 0x00000cff (0x100) IX[B](B)
(=3D=3D) ATI(0): Chipset: "ati".
(++) ATI(0): Depth 16, (--) framebuffer bpp 16
(**) ATI(0): Option "Noaccel"
(II) ATI(0): BIOS Data: BIOSSize=3D0x0000, ROMTable=3D0x0000.
(II) ATI(0): BIOS Data: ClockTable=3D0x0000, FrequencyTable=3D0x0000.
(II) ATI(0): BIOS Data: LCDTable=3D0x0000, LCDPanelInfo=3D0x0000.
(II) ATI(0): BIOS Data: VideoTable=3D0x0000, HardwareTable=3D0x0000.
(II) ATI(0): BIOS Data: I2CType=3D0x00, Tuner=3D0x00, Decoder=3D0x00, Audi=
o=3D0x0F.
(--) ATI(0): ATI 3D Rage LT Pro graphics controller detected.
(--) ATI(0): Chip type 4C49 "LI", version 4, foundry UMC, class 0, revision=
0x03.
(--) ATI(0): PCI bus interface detected.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(=3D=3D) ATI(0): RGB weight 565
(=3D=3D) ATI(0): Default visual is TrueColor
(=3D=3D) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(--) ATI(0): 1024x768 panel (ID 0) detected.
(--) ATI(0): Panel clock is 31.500 MHz.
(II) ATI(0): Using digital flat panel interface.
(II) ATI(0): Storing hardware cursor image at 0x817FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0x81800000.
(!!) ATI(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0x80881400.
(II) ATI(0): Using Block 1 MMIO aperture at 0x80881000.
(--) ATI(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(II) ATI(0): Using shadow frame buffer.
(II) ATI(0): Engine XCLK 47.727 MHz; Refresh rate code 6.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(0): Maximum clock: 121.00 MHz
(II) ATI(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "576x432" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x480" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x960" (bad mode clock/interlace/do=
ublescan)
(II) ATI(0): Not using default mode "640x480" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "640x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "800x600" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "896x672" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "896x672" (bad mode clock/interlace/dou=
blescan)
(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "928x696" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "928x696" (bad mode clock/interlace/dou=
blescan)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "960x720" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/dou=
blescan)
(II) ATI(0): Not using default mode "1152x768" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "576x432" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1400x1050" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "700x525" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1400x1050" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "700x525" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "800x512" (exceeds panel dimensions)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/dou=
blescan)
(II) ATI(0): Not using default mode "2048x1536" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/do=
ublescan)
(II) ATI(0): Not using default mode "2048x1536" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/do=
ublescan)
(II) ATI(0): Not using default mode "2048x1536" (bad mode clock/interlace/d=
oublescan)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/do=
ublescan)
(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
(**) ATI(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) ATI(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 =
808 +hsync +vsync
(**) ATI(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) ATI(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 =
800 +hsync +vsync
(**) ATI(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) ATI(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 =
806 -hsync -vsync
(**) ATI(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) ATI(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 =
806 -hsync -vsync
(**) ATI(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) ATI(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 =
817 interlace +hsync +vsync
(**) ATI(0): Built-in mode "Native panel mode": 31.5 MHz, 30.3 kHz, 39.3 Hz
(II) ATI(0): Modeline "Native panel mode" 31.50 1024 1024 1032 1040 768=
768 769 770
(**) ATI(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) ATI(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 =
-hsync -vsync
(**) ATI(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 =
+hsync +vsync
(**) ATI(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) ATI(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 =
+hsync +vsync
(**) ATI(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) ATI(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 =
+hsync +vsync
(**) ATI(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) ATI(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 =
+hsync +vsync
(**) ATI(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) ATI(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 =
+hsync +vsync
(**) ATI(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -=
hsync -vsync
(**) ATI(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) ATI(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -=
hsync -vsync
(**) ATI(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) ATI(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -=
hsync -vsync
(**) ATI(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -=
hsync -vsync
(**) ATI(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) ATI(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -=
hsync +vsync
(**) ATI(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -=
hsync +vsync
(**) ATI(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +=
hsync -vsync
(**) ATI(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) ATI(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 d=
oublescan +hsync +vsync
(**) ATI(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) ATI(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 d=
oublescan +hsync +vsync
(**) ATI(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) ATI(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 d=
oublescan +hsync +vsync
(**) ATI(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) ATI(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 d=
oublescan -hsync -vsync
(**) ATI(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) ATI(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 d=
oublescan -hsync -vsync
(**) ATI(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) ATI(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 i=
nterlace doublescan +hsync +vsync
(**) ATI(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) ATI(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 d=
oublescan -hsync -vsync
(**) ATI(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 d=
oublescan +hsync +vsync
(**) ATI(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) ATI(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 d=
oublescan +hsync +vsync
(**) ATI(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) ATI(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 d=
oublescan +hsync +vsync
(**) ATI(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) ATI(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 d=
oublescan +hsync +vsync
(**) ATI(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) ATI(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 d=
oublescan +hsync +vsync
(**) ATI(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) ATI(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 d=
oublescan -hsync -vsync
(**) ATI(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) ATI(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 d=
oublescan -hsync -vsync
(**) ATI(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) ATI(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 d=
oublescan -hsync -vsync
(**) ATI(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) ATI(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 d=
oublescan -hsync -vsync
(**) ATI(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) ATI(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 d=
oublescan -hsync +vsync
(**) ATI(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 d=
oublescan -hsync +vsync
(**) ATI(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 d=
oublescan +hsync -vsync
(++) ATI(0): DPI set to (100, 100)
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 0.1.0
ABI class: XFree86 Video Driver, version 0.8
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.3
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor=3D"The XFree86 Project"
compiled for 4.5.0, module version =3D 1.2.0
ABI class: XFree86 Video Driver, version 0.8
(WW) ATI(0): I2C bus Mach64 initialisation failure.
(II) ATI(0): I2C bus "Mach64" removed.
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x80881000 - 0x80881fff (0x1000) MS[B]
[1] 0 0 0x81000000 - 0x81ffffff (0x1000000) MS[B]
[2] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[3] -1 0 0x00000000 - 0x00000000 (0x1) MX[B]
[4] -1 0 0x80800000 - 0x8087ffff (0x80000) MX[B]E
[5] -1 0 0x80882000 - 0x80883fff (0x2000) MX[B]E
[6] -1 0 0x80881000 - 0x80881fff (0x1000) MX[B](B)
[7] -1 0 0x81000000 - 0x81ffffff (0x1000000) MX[B](B)
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[11] -1 0 0x00000c00 - 0x00000cff (0x100) IX[B](B)
(WW) ATI(0): RENDER extension not supported with a shadowed framebuffer.
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 1024 x 3327 rectangle at 0,768
(II) ATI(0): 512 x 3328 rectangle at 0,768
(=3D=3D) ATI(0): Backing store disabled
(=3D=3D) ATI(0): Silken mouse enabled
(**) Option "dpms"
(**) ATI(0): DPMS enabled
(=3D=3D) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "wsmouse"
(**) Mouse1: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/wsmouse"
(=3D=3D) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing =
from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing fr=
om list!
--r5Pyd7+fXNt84Ff3--