On Apr 4, 2005, at 5:39 PM, Michael wrote:

> Hello,
>
>> I've recently acquired one of the above machines, and it works quite
>> well with NetBSD (2.0) so far, however I've not figured out how to get
>> NetBSD to recognize the G3 upgrade.
>> Anyone have ideas?
> That's not very specific - please post your dmesg output so we can see  
> what NetBSD thinks it's running on.
>
>> I'm updating it to -CURRENT right now, just in case that helps.
> It will, almost certainly.
>
> have fun
> Michael
>
>


That's correct, Michael and Matthew. I'm trying to enable the G3  
upgrade card in the L2 cache slot. The original (and soldered on)  
250MHz 603e works just fine. I realize that these cards are a major  
hack, and it may not be possible to get it to work, but it'd be nice to  
have the slightly faster machine if there's a way to do it.


dmesg (from custom kernel) is:

NetBSD 3.99.3 (CAMEMBERT) #0: Mon Apr  4 17:37:24 PDT 2005
          
adam@camembert.blacktabby.org:/usr/src/sys/arch/macppc/compile/ 
CAMEMBERT
total memory = 98304 KB
avail memory = 89704 KB
mainbus0 (rkot)
cpu0 at mainbus0: 603ev (Revision 2.1), ID 0 (primary)
cpu0: HID0 90c001<DOZE,DPM,ICE,DCE,NOPTI>
cpu0bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Brhdge (rev. 0x03)
tlp0 at Pci0 dev 13 function 0: Lite-On 82C169 Ethernet, pass 2.0
tlp0: interrupting at irq 23
tlp0: Ethernet address 00:c0:f0:5a:9d:f3
ukphy0 at tlp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: MTD972 10/100 media interface (OUI 0x00032d, model 0x0000),  
rev. 8
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Intel 82557 Fast Ethernet LAN Controller (ethernet network, revision  
0x08) at pci0 dev 14 function 0 lmt configured
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 offset 0x13000: ipq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1 (console(
awacs0 at obio0 offset 0x14000: irq 17,8,9
audio0 at awacs0: full duplex
swim3 at obio0 offset 0x15000 not configured
nvram0 at obio0 offset 0x60000
wdc0 at obio0 offset 0x20000 irq 13: DMA transfer
atabus0 at wdc0 channel 0
adb0 at obio0 offset 0x16000 irq 18: 0 targets
aed0 at adb0 addr 0: ADB Event device
ofb0 at pci0 dev 18 function 0: ATI Technologies 3D Rage I/II
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0 kbdmux 1
wsmux1: connecting to wsdisplay0
IPsec:Initialized Security Association Processing.
scsibus0: waiting 2 seconds for devices to settle...
cd0 at scsibus0 target 3 lun 0: <MATSHITA, CD-ROM CR-8024, 2.0e> cdrom  
removable
wd0 at atabus0 drive 0: <IBM-DJAA-31700>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 1628 MB, 3308 cyl, 16 head, 63 sec, 512 bytes/sect x 3334464  
sectors
wd0: drive supports PIO mode 4, DMA mode 2
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (uSing DMA)
boot device: wd0
root on sd0a dumps on wd0b
root file system type: ffs


Any other info you need, or things you would like me to try, just let  
me know. I got the machine basically for free, and it's just another  
thing to play with.

  -Adam