Hi All, 
I've got a kernel from Michael, thanx again.
here's my boot output
NetBSD 2.99.11 (GENERIC) #9: Tue Dec 28 22:21:25 EST
2004
	ml@Macallan:/data/src/sys/arch/macppc/compile/GENERIC
total memory = 65536 KB
avail memory = 56648 KB
autoconf.c bootpath: scsi-int/sd@0/netbsd
autoconf.c OF_canon result:
/bandit@F2000000/gc@10/mesh@18000/sd@0,0
autoconf.c cbootpath:
/bandit@F2000000/gc@10/mesh@18000/sd@0
mainbus0 (root)
cpu0 at mainbus0: 604e (Revision 2.4), ID 0 (primary)
cpu0: HID0 8000c084<EMCP,ICE,DCE,SGE,BHT>, PS=-1
cpu0: 200.00 MHz
bandit0 at mainbus0 (bootpath member) 
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev.
0x03)
obio0 at pci0 dev 16 function 0 (bootpath member) :
addr 0xf3000000
esp0 at obio0 offset 0x10000 irq 12: NCR53C94, 25MHz,
SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
mc0 at obio0 offset 0x11000: irq 14,2,3: address
00:a0:40:34:ec:16
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
adb0 at obio0 offset 0x16000 irq 18: 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard (ISO layout)
wskbd0 at akbd0: console keyboard
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0 mux 0
mesh0 at obio0 offset 0x18000 (bootpath member)  irq
13: 50MHz, SCSI ID 7
scsibus1 at mesh0: 8 targets, 8 luns per target
nvram0 at obio0 offset 0x1d000
bandit1 at mainbus0
pci1 at bandit1 bus 1
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer Bandit Host-PCI Bridge (rev.
0x03)
Madge Networks Smart 16/4 PCI Ringnode Mk2 (token ring
network) at pci1 dev 13 function 0 not configured
ofb0 at pci1 dev 14 function 0: ATI Technologies
Mach64 GX
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100
emulation), using wskbd0
wsmux1: connecting to wsdisplay0
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
probe(mesh0:0:0:0): max sync rate 10.00Mb/s
sd0 at scsibus1 target 0 lun 0: <QUANTUM, FIREBALL
SE3.2S, PJ0A> disk fixed (bootpath member) 
sd0: drive offline
probe(mesh0:0:3:0): max sync rate 5.00Mb/s
cd0 at scsibus1 target 3 lun 0: <MATSHITA, CD-ROM
CR-8008, 8.0e> cdrom removable
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs

I've tried to ping my netbsd macppc host from netbsd
i386 and I have no packetloss!
but when it comes to downloading things speed gets
only upto 15KB/s! well thats much
faster than before (with generic kernel) which was
0.15KB
I've sshed to my mac and started to download
netbsd_macppc kernel from computer next to it, was
funny to watch cable 20cm lenght ethernet link and
speed of 0.15KB/s in addition to that I've 
lost connection to my mac on half way with following
error message:
	Write failed: Host is down
I was quite surprised after I've connected monitor to
mac I've discovered following message from the kernel:
mcwatchdog: resetting chip
mcwatchdog: resetting chip

when I've checked ifconfig -a, mc0 was there with all
the settings when I've tried to ping my pc from mac
I've
got following error message:
ping: sendto: no buffer space available
ping: sendto: no buffer space available
and so on
after I reboot pc and set all stuff up again + I went
do /dev and ran MAKEDEV all
and guess what? my transfer rate increased a lot
actually it's 935KB/s! i don't know the
reason for that but it seems like I'll keep this
ethernet for a bit and will try to see if any problems
accurs
if anybody got any suggestions on this matter you are
more than welcome to help

Thanx everyone



		
__________________________________ 
Do you Yahoo!? 
Meet the all-new My Yahoo! - Try it today! 
http://my.yahoo.com