Subject: post installation issues
To: None <port-macppc@netbsd.org>
From: Tomas D <u0giene@yahoo.com>
List: port-macppc
Date: 01/09/2005 02:48:22
Hi all,
I've just installed netbsd 2.0 on my macppc 9500/200!
http://images.bite.lt/banga/files/club/41e109155240a.jpg
and there are few issues so far.
I'm having trouble accessing cdrom and floppy (I can't
even see floppy on dmesg)
here's my boot output: 

Open Firmware, 1.0.5
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
 ok
0 > setenv auto-boot? false  ok
0 > setenv load-base 600000  ok
0 > setenv real-base F00000  ok
0 > setenv output-device want_to_use_serial_please ok
0 > setenv input-device kbd  ok
0 > setenv boot-device scsi-int/sd@0:0  ok
0 > setenv boot-file netbsd  ok
0 > reset-all
Open Firmware, 1.0.5
To continue booting the MacOS type:
BYE<return>
To continue booting from the default boot device type:
BOOT<return>
 ok
0 > boot
OF_open bootpath=scsi-int/sd@0
read stage 2 blocks: 0123456. done!
starting stage 2...

>> NetBSD/macppc OpenFirmware Boot, Revision 1.10
>> (builds@build, Wed Dec  1 13:46:04 UTC 2004)
no active package4774576+332556
[234528+210173]=0x54b9b8 start=0x100000               
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001,
2002, 2003, 2004      
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All
rights reserved.              

NetBSD 2.0 (GENERIC) #0: Wed Dec  1 14:03:55 UTC 2004
       
builds@build:/big/builds/ab/netbsd-2-0-RELEASE/macppc/200411300000Z-obj/
big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/macppc/compile/GENERIC
         
total memory = 65536 KB
avail memory = 56860 KB
no active packagemainbus0 (root)
cpu0 at mainbus0: 604ev (Revision 2.4), ID 0 (primary)
cpu0: HID0 8090c084<EMCP,DOZE,DPM,ICE,DCE,SGE,BHT>
bandit0 at m
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev.
0x03)
obio0 at pci0 dev 16 function 0: addr 0xf3000000
esp0 at obio0 offset 0x10000 irq 12: NCR53C94, 25MHz,
SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
mc0 at obio0 offset 0x11000: irq 14,2,3: address
00:a0:40:34:ec:16
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
adb0 at obio0 offset 0x16000 irq 18: 1 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard (ISO layout)
wskbd0 at akbd0 mux 1
mesh0 at obio0 offset 0x18000 irq 13: 50MHz, SCSI ID 7
scsibus1 at mesh0: 8 targets, 8 luns per target
nvram0 at obio0 offset 0x1d000
bandit1 at mainbus0
pci1 at bandit1 bus 1
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer Bandit Host-PCI Bridge (rev.
0x03)
Madge Networks Smart 16/4 PCI Ringnode Mk2 (token ring
network) at pci1 dev 13 function 0 not configured
ofb0 at pci1 dev 14 function 0: ATI Technologies
Mach64 GX
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0 kbdmux 1
wsmux1: connecting to wsdisplay0
wskbd0: connecting to wsdisplay0
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 0 lun 0: <QUANTUM, FIREBALL
SE3.2S, PJ0A> disk fixed
sd0: drive offline
cd0 at scsibus1 target 3 lun 0: <MATSHITA, CD-ROM
CR-8008, 8.0e> cdrom removable                        
         
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
Sat Jan  8 15:48:58 UTC 2005
swapctl: adding /dev/sd0b as swap device at priority 0
Checking for botched superblock upgrades: done.
Starting file system checks:
/dev/rsd0a: file system is clean; not checking
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: uogiene
IPv6 mode: host
Configuring network interfaces:.
Building databases...
Starting syslogd.
Checking for core dump...
savecore: no core dump
Mounting all filesystems...
Clearing /tmp.
Checking quotas: done.
Starting virecover.
Starting local daemons:.
Updating motd.
Starting sendmail.
Starting inetd.
Starting cron.
Sat Jan  8 15:49:12 UTC 2005
Jan  8 15:49:14 uogiene getty[305]: /d
NetBSD/macppc (uogiene) (tty00)

login: root
root login refused on this terminal.
Jan  8 15:49:18 uogiene login: LOGIN root REFUSED ON
TTY ttyZ0
login: dummy
Password:
Last login: Sat Jan  8 16:17:27 2005 on ttyZ0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001,
2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All
rights reserved.

NetBSD 2.0 (GENERIC) #0: Wed Dec 1 14:03:55 UTC 2004

Welcome to NetBSD!

tset: terminal type su is unknown
Terminal type? vt100
Quick!!  Act as if nothing has happened!
$ su
Jan  8 16:27:01 uogiene su: dummy to root on
/dev/ttyZ0
uogiene# disklabel /dev/cd0
disklabel: /dev/cd0c: Device busy
uogiene# mount_cd9660 /dev/cd0a /mnt/cdrom
mount_cd9660: /dev/cd0a on /mnt/cdrom: Device busy
uogiene#

+ is there a chance to make sound work?
+ can I connect token ring with normal ethernet?

thanx everyone 
take care
tom



		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - Find what you need with new enhanced
search.
http://info.mail.yahoo.com/mail_250


	
		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - You care about security. So do we. 
http://promotions.yahoo.com/new_mail