Hello,

> >Hmm, it doesn't panic anymore but it doesn't enable the cache either (
> >300MHz G3, 1MB cache )
> 
> Please send dmesg.

Here you go...
NetBSD 2.99.11 (GENERIC) #4: Sat Dec 18 07:51:05 EST 2004
        root@Macallan:/data/src/sys/arch/macppc/compile/GENERIC
total memory = 408 MB
avail memory = 388 MB

autoconf.c bootpath: scsi-int/sd@0/netbsd.gen
autoconf.c OF_canon result: /bandit@F2000000/gc@10/mesh@18000/sd@0,0
autoconf.c cbootpath: /bandit@F2000000/gc@10/mesh@18000/sd@0
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 2.2), ID 0 (primary)
cpu0: HID0 8090c0a4<EMCP,DOZE,DPM,ICE,DCE,SGE,BTIC,BHT>
cpu0: 300.00 MHz L2 cache present but not enabled 
bandit0 at mainbus0 (bootpath member) 
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
isp0 at pci0 dev 13 function 0isp: using memory mapped IO
: QLogic 1020 Fast Wide SCSI HBA
isp0: interrupting at irq 23
isp0: Ram Checksum Failure
ofb0 at pci0 dev 14 function 0: 3Dfx Interactive Voodoo3
ofb0: 640 x 480, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb0 at pci0 dev 15 function 0: Digital Equipment DC21052 PCI-PCI Bridge (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ohci0 at pci1 dev 0 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci0: interrupting at irq 25
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 0 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci1: interrupting at irq 25
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2 at pci1 dev 0 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci2: interrupting at irq 25
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
Acer Labs M5239 USB 2.0 Host Controller (USB serial bus, interface 0x20, revisio
n 0x01) at pci1 dev 0 function 3 not configured
ofb1 at pci1 dev 1 function 0: Matrox MGA Millennium II 2164W
ofb1: 640 x 480, 8bpp
wsdisplay at ofb1 not configured
Yamaha 724 Audio (audio multimedia, revision 0x05) at pci1 dev 2 function 0 not configured
Zoran product 0x6057 (video multimedia, revision 0x01) at pci1 dev 3 function 0 not configured
obio0 at pci0 dev 16 function 0 (bootpath member) : addr 0xf3000000
esp0 at obio0 offset 0x10000 irq 12: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
mc0 at obio0 offset 0x11000: irq 14,2,3: address 00:a0:59:03:26:52
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
adb0 at obio0 offset 0x16000 irq 18: 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard (ISO layout)
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0 mux 0
mesh0 at obio0 offset 0x18000 (bootpath member)  irq 13: 50MHz, SCSI ID 7
scsibus1 at mesh0: 8 targets, 8 luns per target
nvram0 at obio0 offset 0x1d000
tlp0 at pci0 dev 17 function 0: DECchip 21140 Ethernet, pass 1.2
tlp0: broken MicroWire interface detected; setting SROM size to 1Kb
tlp0: interrupting at irq 23
tlp0: UMAX E100, Ethernet address 00:a0:59:03:b0:55
nsphy0 at tlp0 phy 1: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Sun Microsystems Type 6 USB keyboard, rev 1.00/1.02, addr 2, iclass 3/1
umass0 at uhub1 port 2 configuration 1 interface 0
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
umass0: Genesys Logic USB TO IDE, rev 2.00/0.02, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, 1 lun per target
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 0
uhidev1: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
sd0 at scsibus1 target 0 lun 0: <SEAGATE, SX19171W, 9D23> disk fixed (bootpath member) 
sd0: 8683 MB, 5268 cyl, 20 head, 168 sec, 512 bytes/sect x 17783112 sectors
cd0 at scsibus1 target 3 lun 0: <PIONEER, CD-ROM DR-U03S, 1.01> cdrom removable
sd1 at scsibus1 target 5 lun 0: <IOMEGA, ZIP 100, J.03> disk removable
sd1: drive offline
sd2 at scsibus2 target 0 lun 0: <TOSHIBA, MK2104MAV, 0811> disk fixed
sd2: fabricating a geometry
sd2: 2067 MB, 2067 cyl, 64 head, 32 sec, 512 bytes/sect x 4233600 sectors
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs

That's GENERIC with E100 enabled, cvs updated 2 hours ago.

have fun
Michael