Hi-

I've got a Power Computing Power Tower Pro which is running 1.6_RC2
at the moment... when I try to boot a GENERIC -current kernel, I get this:

0 > boot netbsd-GENERIC
>> NetBSD/macppc OpenFirmware Boot, Revision 1.2
>> (matt@duel.local, Sat Apr  7 18:09:48 PDT 2001)
no active package4640504+334692 [155+228832+204453DEFAULT CATCH!, code=FFF00700
 ok
0 >


However, I can boot a -current INSTALL kernel (at least until the 
point where it asks me what to do next), and a GENERIC 1.6.2 kernel
just fine.  Anyone know what's up, and what I can do to fix it?  This
is an OpenFirmware 1.0.5 machine.

Also, in case it helps, here's the dmesg from booting the 1.6.2 GENERIC
kernel:

NetBSD 1.6.2 (GENERIC) #0: Tue Feb 10 23:52:52 UTC 2004
    autobuild@tgm.netbsd.org:/autobuild/netbsd-1-6-PATCH002/macppc/OBJ/autobuild
/netbsd-1-6-PATCH002/src/sys/arch/macppc/compile/GENERIC
total memory = 192 MB
avail memory = 168 MB
using 2048 buffers containing 9932 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 604ev (Revision 2.2), ID 0 (primary)
cpu0: HID0 8090c084<EMCP,DOZE,DPM,ICE,DCE,SGE,BHT>
bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
ohci0 at pci0 dev 13 function 0: Opti RM861HA (rev. 0x10)
ohci0: interrupting at irq 23
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Opti OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ex0 at pci0 dev 14 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x24)
ex0: interrupting at irq 24
ex0: MAC address 00:10:5a:a7:4f:91
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
obio0 at pci0 dev 16 function 0: addr 0xf3000000
esp0 at obio0 offset 0x10000 irq 12: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
mc0 at obio0 offset 0x11000: irq 14,2,3: address 00:a0:59:04:a1:e3
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
adb0 at obio0 offset 0x16000 irq 18: 0 targets
aed0 at adb0 addr 0: ADB Event device
mesh0 at obio0 offset 0x18000 irq 13: 50MHz, SCSI ID 7
scsibus1 at mesh0: 8 targets, 8 luns per target
nvram0 at obio0 offset 0x1d000
bandit1 at mainbus0
pci1 at bandit1 bus 1
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
ofb0 at pci1 dev 15 function 0: cannot map framebuffer
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 0 lun 0: <IBM, DCAS-34330, S65A> SCSI2 0/direct fixed
sd0: 4134 MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x 8467200 sectors
sd1 at scsibus1 target 1 lun 0: <SEAGATE, ST32171N, 0338> SCSI2 0/direct fixed
sd1: 2061 MB, 5168 cyl, 5 head, 163 sec, 512 bytes/sect x 4222640 sectors
cd0 at scsibus1 target 4 lun 0: <PIONEER, CD-ROM DR-U06S, 1.05> SCSI2 5/cdrom re
movable
boot device: sd1
root on sd1a dumps on sd1b
root file system type: ffs



-- 
Jeff Rizzo                                         http://boogers.sf.ca.us/~riz