after a couple fixes that went in this weekend, my new dual G4 tower is
working beautifully now.  here's a dmesg:


NetBSD 1.6W (CHUQ.G4.MP.perf) #25: Mon Aug 18 00:24:31 PDT 2003
        chs@spathi.chuq.com:/home/chs/netbsd/src/sys/arch/macppc/compile/CHUQ.G4.MP.perf
total memory = 512 MB
avail memory = 464 MB
using 3072 buffers containing 26316 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 7455 (Revision 3.3), ID 0 (primary)
cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
cpu0: 1250.00 MHz, 256KB L2 cache, 2MB no-parity L3 cache (DDR SRAM) at 6:1 ratio
cpu1 at mainbus0: 7455 (Revision 3.3), ID 1
cpu1: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
cpu1: 1250.00 MHz, 256KB L2 cache, 2MB no-parity L3 cache (DDR SRAM) at 6:1 ratio
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x10000 not configured
via-pmu at obio0 offset 0x16000 not configured
wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer
wdc1 at obio0 offset 0x20000 irq 20: DMA transfer
atapibus0 at wdc1 channel 0: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-R1312, 63RN302178, 1A06> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
ohci0 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
wdc2 at pci2 dev 13 function 0: interrupting at irq 39
wd0 at wdc2 channel 0 drive 0: <ST380011A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc2:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x01)
fwohci0: interrupting at irq 40
fwohci0: OHCI 1.1, 00:0a:95:ff:fe:75:79:1a, 400Mb/s, 2048 max_rec, 8 ir_ctx, 8 it_ctx
gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x00)
gem0: interrupting at irq 41
gem0: Ethernet address 00:0a:95:75:79:1a, 10KB RX fifo, 4KB TX fifo
brgphy0 at gem0 phy 0: BCM5421 1000BASE-T media interface, rev. 1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
fw0 at fwohci0: 00:0a:95:ff:fe:75:79:1a:0a:02:ff:ff:f0:01:00:00
boot device: gem0
root on gem0


happy mac'ing,

-Chuck