I'm having problems with the wi driver in current-20030524 on my PB
2400c.  The card is ZCom Prism2 station firmware 1.3.6, which works
fine in 1.6.1 on this same machine.  I see wi.c has not changed since
my build.  

Is anyone else having problems?  Anything I should try?

NetBSD 1.6T (PROSERPIMA) #0: Wed May 28 11:34:12 EDT 2003
	carton@proserpima:/usr/src/sys/arch/macppc/compile/PROSERPIMA
total memory = 81920 KB
avail memory = 68956 KB
using 1049 buffers containing 4196 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 750 (Revision 2.2), ID 0 (primary)
cpu0: HID0 8090c0a4<EMCP,DOZE,DPM,ICE,DCE,SGE,BTIC,BHT>
cpu0: 240.00 MHz, no-parity 512KB WB L2 cache (PB SRAM) at 2:1 ratio
cpu0: ohare L2 cache enabled
bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer Bandit Host-PCI Bridge (rev. 0x03)
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs0 at obio0 offset 0x14000: irq 17,8,9
audio0 at awacs0: full duplex
mediabay0 at obio0 offset 0x34 irq 29 level-triggered
wdc0 at obio0 offset 0x20000 irq 13: DMA transfer
wd0 at wdc0 channel 0 drive 0: <IBM-DJSA-220>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
adb0 at obio0 offset 0x16000 irq 18: 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: mapped device (28)
wskbd0 at akbd0: console keyboard
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
ofb0 at pci0 dev 17 function 0: Chips and Technologies 65550
ofb0: 800 x 600, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
cbb0 at pci0 dev 19 function 0: Texas Instruments PCI1130 PCI-CardBus Bridge (rev. 0x04)
cbb1 at pci0 dev 19 function 1: Texas Instruments PCI1130 PCI-CardBus Bridge (rev. 0x04)
cbb0: interrupting at irq 22
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 0 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 23
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 0 device 0
pcmcia1 at cardslot1
IPsec: Initialized Security Association Processing.
scsibus0: waiting 2 seconds for devices to settle...
pcmcia0: CIS version PC Card Standard 5.0
pcmcia0: CIS info:  , IEEE 802.11 Wireless LAN/PC Card, 
pcmcia0: Manufacturer code 0xd601, product 0x5
pcmcia0: function 0: network adapter, ccr addr 3e0 mask 1
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel
wi0 at pcmcia0 function 0:  , IEEE 802.11 Wireless LAN/PC Card, 
wi0: 802.11 address 00:60:b3:71:dc:af
wi0: using RF:PRISM2.5 MAC:ISL3873B(PCMCIA)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
pcmcia1: CIS checksum failed
pcmcia1: CIS version PCMCIA 2.0 or 2.1
pcmcia1: CIS info: CF+ LPE, Socket Communications Inc, Revision E, 08/04/99
pcmcia1: Manufacturer code 0x104, product 0x75
pcmcia1: function 0: network adapter, ccr addr 3f8 mask 3
pcmcia1: function 0, config table entry 32: I/O card; irq mask ffff; iomask a, iospace 300-31f; mwait_required io16 irqlevel
pcmcia1: function 0, config table entry 33: I/O card; irq mask ffff; iomask a, iospace 320-33f; mwait_required io16 irqlevel
pcmcia1: function 0, config table entry 34: I/O card; irq mask ffff; iomask a, iospace 340-35f; mwait_required io16 irqlevel
pcmcia1: function 0, config table entry 35: I/O card; irq mask ffff; iomask a, iospace 360-37f; mwait_required io16 irqlevel
pcmcia1: function 0, config table entry 33: I/O card; irq mask ffff; iomask a, iospace 320-33f; mwait_required io16 irqlevel
pcmcia1: function 0, config table entry 34: I/O card; irq mask ffff; iomask a, iospace 340-35f; mwait_required io16 irqlevel
pcmcia1: function 0, config table entry 35: I/O card; irq mask ffff; iomask a, iospace 300-31f; mwait_required io16 irqlevel
ne0 at pcmcia1 function 0
ne0: Socket Communications LP-E CF Ethernet
ne0: Ethernet address 00:c0:1b:00:ab:c0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs


-- 
There's some things you're gonna see that'll make it hard to smile in
the future.