Have been trying to install NetBSD 1.6 from the distribution CDs that
I have but the bootloader and ramdisk kernel files are too big to fit
on a MS-DOS formatted floppy.  Downloaded the 1.5.3 versions from the
web site and had better luck, but it's locking up during the boot.

Computer is a Power Computing PowerBase 200 with a PowerLogix G3/400
card installed.

Suggestions?

Boot log follows:

Thanks,
Mike

0 > boot fd:,\OFWBOOT.XCF NETBSD.GZ loading XCOFF
tsize=C250 dsize=1500 bsize=1608 entry=640000
SECTIONS:
.text    00640000 00640000 0000C250 000000E0
.data    0064D000 0064D000 00001500 0000C330
.bss     0064E500 0064E500 00001608 00000000
loading .text, done..
loading .data, done..
clearing .bss, done..

 >> NetBSD/macppc OpenFirmware Boot, Revision 1.2
 >> (briggs@cheetah, Mon Jul  1 20:13:40 PDT 2002)
3663764+153304=0x3a410c
  start=0x800000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

NetBSD 1.5.3 (INSTALL) #4: Mon Jul  1 20:50:27 PDT 2002
     briggs@cheetah:/usr/src/sys/arch/macppc/compile/INSTALL
CPU: 750 (Revision 3202)
total memory = 136 MB
avail memory = 122 MB
using 1024 buffers containing 4096 KB of memory
mainbus0 (root)
cpu0 at mainbus0: L2 cache not enabled
bandit0 at mainbus0
pci0 at bandit0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: vendor 0x106b product 0x0001 (rev. 0x03)
rtk0 at pci0 dev 13 function 0: Accton MPX 5030/5038 10/100BaseTX
rtk0: interrupting at irq 23
rtk0: Ethernet address 00:e0:29:70:2b:8d
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb0 at pci0 dev 14 function 0: vendor 0x3388 product 0x0021 (rev. 0x11)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vendor 0x1033 product 0x00cd (Firewire serial bus, interface 0x10, 
revision 0x03
) at pci1 dev 12 function 0 not configured
ohci0 at pci1 dev 13 function 0: vendor 0x1033 product 0x0035 (rev. 
0x41)
ohci0: interrupting at irq 25
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 13 function 1: vendor 0x1033 product 0x0035 (rev. 
0x41)
ohci1: interrupting at irq 25
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
vendor 0x1033 product 0x00e0 (USB serial bus, interface 0x20, revision 
0x01) at
pci1 dev 13 function 2 not configured
obio0 at pci0 dev 16 function 0: addr 0xf3000000
mesh0 at obio0 offset 0x10000 irq 12: 50MHz, SCSI ID 7
scsibus0 at mesh0: 8 targets, 8 luns per target
zsc0 at obio0 offset 0x13000: irq 15,16
zstty0 at zsc0 channel 0 (console)
zstty1 at zsc0 channel 1
awacs at obio0 offset 0x14000 not configured
swim3 at obio0 offset 0x15000 not configured
nvram at obio0 offset 0x60000 not configured
adb0 at obio0 offset 0x16000 irq 18: