-current boots on my g4 powerbook 800 after Matt's rototill of
powerpc based ports,

  http://mail-index.netbsd.org/source-changes/2002/07/05/0058.html

CPU speed is incorrectly reported as 666.67MHz, for reasons unknown
to me :)

NetBSD 1.6D (GENERIC) #0: Sat Jul  6 09:10:52 EST 2002
    grant@max:/work/src/sys/arch/macppc/compile/GENERIC
total memory = 512 MB
avail memory = 461 MB
using 2048 buffers containing 26316 KB of memory
mainbus0 (root)
cpu0 at mainbus0: 7455 (Revision 2.1), ID 0 (primary)
cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
cpu0: 666.67 MHz
cpu0: 256KB L2 cache, 1MB L3 backside cache
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
Apple Computer UniNorth AGP Interface (host bridge) at pci0 dev 11 function 0 not configured
ofb0 at pci0 dev 16 function 0: ATI Technologies product 0x4c57
ofb0: 1280 x 854, 8bpp
wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
Apple Computer UniNorth Host-PCI Bridge (host bridge) at pci1 dev 11 function 0 not configured
obio0 at pci1 dev 23 function 0: addr 0x80000000
zsc0 at obio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
i2s at obio0 offset 0x10000 not configured
adb0 at obio0 offset 0x16000 irq 47: 3 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: PowerBook G3 keyboard
wskbd0 at akbd0 mux 1
wskbd0: connecting to wsdisplay0
ams0 at adb0 addr 3: EMP trackpad <tpad> 2-button, 400 dpi
wsmouse0 at ams0 mux 0
abtn0 at adb0 addr 7: brightness/volume button
apm0 at adb0: battery flags 0x4, 39% charged
battery at obio0 offset 0x0 not configured
backlight at obio0 offset 0xf300 not configured
wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer
wd0 at wdc0 channel 0 drive 0: <IBM-IC25N040ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
ata4 conf[0] = 0xc519465, cyc = 2 (30 ns), act = 6 (90 ns), inact = 3
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
wdc1 at obio0 offset 0x20000 irq 20: DMA transfer
atapibus0 at wdc1 channel 0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITACD-RW  CW-8121, , AA17> type 5 cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2
conf[0] = 0x11823, cyc = 4 (120 ns), act = 3 (75 ns), inact = 1
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wdc2 at obio0 offset 0x21000 irq 21: DMA transfer
wi0 at obio0 offset 0x30000 irq 57: 802.11 address 00:30:65:16:5d:c5
wi0: using Lucent Embedded WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.12.1)
ohci0 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cbb0 at pci1 dev 26 function 0: Texas Instruments PCI1410 PCI-CardBus Bridge (rev. 0x02)
cbb0: interrupting at irq 58
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0
pcmcia0 at cardslot0
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
Apple Computer UniNorth Host-PCI Bridge (host bridge) at pci2 dev 11 function 0 not configured
fwohci0 at pci2 dev 14 function 0: Lucent Technologies product 0x5811 (rev. 0x00)
fwohci0: interrupting at irq 40
fwohci0: OHCI 1.0, 00:03:93:ff:fe:b4:c5:b2, 400Mb/s, 2048 max_rec, 8 iso_ctx
gm0 at pci2 dev 15 function 0: Ethernet address 00:03:93:b4:c5:b2
gm0: interrupting at irq 41
ukphy0 at gm0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x000e, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
fw0 at fwohci0: 00:03:93:ff:fe:b4:c5:b2:0a:02:20:00:00:00:00:00
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs